Airtac SC80 Standard Cylinder SC80X1100
The AirTAC Airtac SC80 Standard Cylinder SC80X1100 is a genuine double-acting standard air cylinder with a Ø80mm bore and 1100mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke1100 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X1100
The AirTAC SC80X1100 is a double-acting tie-rod cylinder delivering a push force of 2513 N at 0.5 MPa and up to 4523 N at 0.9 MPa operating pressure. With an 80 mm bore and 1100 mm stroke, it uses a 25 mm diameter piston rod and PT3/8 ports, making it a robust choice for medium-to-long linear movements in industrial automation.
This model features a 28 mm adjustable air cushion at each end to decelerate the piston smoothly, reducing end-of-stroke impact. The body length A is 182 mm, giving a total extended length of approximately 1282 mm. It operates on filtered air at 0.15-1.0 MPa and temperatures from -20 to +70 °C with standard TPU seals.
Airtac SC80 Standard Cylinder SC80X1100 Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X1100 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 1100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X1100
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×1100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X1100 Is Used
Long-Stroke Part Transfer
Moves components 1100 mm across conveyor junctions or between machining stations, using its 2513 N push force to shift heavy totes or pallets reliably.
Vertical Panel Press
Applies up to 4523 N of clamping force at 0.9 MPa in a woodworking or assembly press, with the adjustable cushion softening the return stroke for large platens.
Automated Diverter Gate
Operates a long-throw diverter in a material-handling chute, where the 1100 mm stroke redirects bulk product flow between two downstream lines.
Is the Airtac SC80 Standard Cylinder SC80X1100 the Right Cylinder?
Select the SC80 when your application needs around 2513 N of force at standard plant pressure; if you require less force, the SC63 bore offers 1559 N at 0.5 MPa, while stepping up to the SC100 provides 3927 N. For this 1100 mm stroke, the long, extended 25 mm rod is susceptible to bending under side loads—always use an external linear guide or rod-alignment coupler to prevent bearing wear and rod buckling.
To ensure a direct replacement, match five key points: 80 mm bore, 1100 mm stroke, PT3/8 port thread, basic (no bracket) mounting, and the absence of a built-in magnet. This cylinder is a tie-rod design and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X1100 FAQ
At 0.7 MPa operating pressure, the SC80 bore generates 3518 N of push force on the piston and 2268 N of pull force on the retract stroke, using its 25 mm rod.
No. For any stroke over 300 mm, especially 1100 mm, side loading can bend the 25 mm rod or damage the rod bearing. You must use an external guide rail or a rod-alignment coupler to absorb transverse forces and protect the cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X1100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.