Airtac SC80 Standard Cylinder SC80X1100FA
The AirTAC Airtac SC80 Standard Cylinder SC80X1100FA is a genuine double-acting standard air cylinder with a Ø80mm bore and 1100mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke1100 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X1100FA
The AirTAC SC80X1100FA is an 80 mm bore, 1100 mm stroke double-acting tie-rod cylinder equipped with a front rectangular flange (FA) for rigid panel mounting. At 0.5 MPa air pressure it generates 2513 N of push force and 2268 N on the pull stroke, placing it in a force class suited to heavy pressing, clamping, and lifting fixtures.
This model uses a 25 mm diameter piston rod with M20x1.5 male threads and PT3/8 ports. The adjustable air cushion at each end is 28 mm long, providing effective deceleration for the moving mass. The total extended body length is approximately 1282 mm (182 mm body length A plus the 1100 mm stroke). The FA front flange mounting accessory (order code F-SC80FA) secures the cylinder at the rod end, resisting thrust loads directly at the point of application.
Airtac SC80 Standard Cylinder SC80X1100FA Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X1100FA |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 1100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X1100FA
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×1100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X1100FA Is Used
Long-Stroke Part Transfer
Moves heavy components 1100 mm across conveyor junctions or assembly stations. The 2513 N push force at 0.5 MPa reliably shifts pallets and fixtures.
Panel-Mounted Press Feed
The FA front flange bolts directly to a machine bulkhead, aligning the rod with a press tool. The 28 mm cushion absorbs impact at the end of the 1100 mm feed stroke.
Vertical Door or Hopper Gate Actuation
Provides the sustained force to lift or slide a heavy industrial door or discharge gate. Use an external guide rail to prevent side-load bending on the extended 25 mm rod.
Is the Airtac SC80 Standard Cylinder SC80X1100FA the Right Cylinder?
Select the SC80 bore when your application needs between 2513 N and 4523 N of push force (0.5–0.9 MPa). If you require less force, the SC63 bore delivers 1559 N at 0.5 MPa and may reduce air consumption and physical size. For higher force demands, step up to the SC100 bore, which provides 3927 N at the same 0.5 MPa pressure.
For this 1100 mm stroke length, carefully evaluate side-load conditions. A long, unsupported 25 mm rod can bend under radial forces; use an external linear guide or rod-alignment coupler to protect the rod bearing and piston seals. For exact drop-in replacement, match five attributes: 80 mm bore, 1100 mm stroke, PT3/8 port thread, FA front flange mounting (F-SC80FA), and the absence of a magnet (non-S code).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X1100FA FAQ
At 0.7 MPa (7 bar) supply pressure, the SC80 bore generates 3518 N of push force. The maximum operating pressure is 1.0 MPa, delivering 4523 N. These values are theoretical; factor in a safety margin for friction and dynamic loads.
Yes, provided the existing cylinder matches these five points: 80 mm bore, 1100 mm stroke, PT3/8 pneumatic ports, an FA front flange mounting pattern (F-SC80FA), and no magnetic piston. The SC series is a tie-rod design, so verify the shorter overall body length (182 mm body + stroke) against your machine envelope.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X1100FA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.