Airtac SC80 Standard Cylinder SC80X1100S
The AirTAC SC80 Standard Cylinder SC80X1100S is a genuine double-acting standard air cylinder with a Ø80mm bore and 1100mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke1100 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X1100S
The AirTAC SC80X1100S is a double-acting single-rod pneumatic cylinder with an 80 mm bore and a substantial 1100 mm stroke, delivering a push force of 2513 N at 0.5 MPa. Its 25 mm diameter piston rod and 28 mm adjustable air cushion provide reliable deceleration for mid-to-heavy linear motion tasks. The built-in magnet allows direct mounting of CMSG/DMSG/EMSG sensors for precise position feedback.
This model is a genuine AirTAC tie-rod cylinder, designed for filtered air systems. With a body length A of 182 mm and a total extended length of approximately 1282 mm, it fits applications needing a long reach. The PT3/8 port thread and M20x1.5 rod thread ensure secure pneumatic connections and tooling attachment.
Airtac SC80 Standard Cylinder SC80X1100S Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X1100S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 1100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X1100S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×1100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X1100S Is Used
Long-Reach Material Transfer
Pushes or pulls components across wide conveyor gaps or transfer stations, with the 1100 mm stroke covering extended travel distances.
Automated Sorting Gates
Actuates tall diverter gates or flaps in chutes and sortation systems, using magnetic sensors to confirm open/closed status at each cycle.
Pallet Layer Forming
Positions slip sheets or tier sheets with a long, controlled stroke in palletising cells, relying on the adjustable cushion to manage end-of-stroke impact.
Is the Airtac SC80 Standard Cylinder SC80X1100S the Right Cylinder?
Choose the SC80X1100S when your application requires a long 1100 mm stroke with sensor-ready position sensing. For higher force, step up to the SC100 bore (3927 N at 0.5 MPa); for a more compact solution, the SC63 bore offers 1559 N. For strokes of this length, always assess side-loading risks on the 25 mm rod and consider an external linear guide to prevent rod bending and premature bearing wear.
For a direct replacement, match these five specifications: 80 mm bore, 1100 mm stroke, PT port thread, the built-in magnet (-S suffix), and the basic mounting style. This cylinder is not dimensionally interchangeable with ISO 15552 profiles.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X1100S FAQ
At 0.5 MPa, the cylinder provides 2513 N push force and 2268 N pull force. At the maximum operating pressure of 0.9 MPa, the push force reaches 4523 N.
Yes. The -S suffix indicates a built-in magnet, allowing you to clamp CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the barrel to detect piston position without additional brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X1100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.