Airtac SC80 Standard Cylinder SC80X1100SH
The AirTAC Airtac SC80 Standard Cylinder SC80X1100SH is a genuine double-acting standard air cylinder with a Ø80mm bore and 1100mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke1100 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X1100SH
The SC80X1100SH is a double-acting pneumatic cylinder delivering 2513 N of push force at 0.5 MPa and up to 4523 N at 0.9 MPa operating pressure. With an 1100 mm stroke and a 25 mm diameter piston rod, it is built for long-reach linear actuation tasks where high-temperature resilience is critical.
This model features a built-in magnet (-S suffix) for direct mounting of CMSG/DMSG/EMSG sensors, enabling precise end-of-stroke detection. The -H suffix specifies Viton (FKM) seals, shifting the operating temperature range to 0 to +150 °C, making it suitable for hot environments such as foundries or autoclaves. The body length A is 182 mm, giving a total extended length of approximately 1282 mm.
Airtac SC80 Standard Cylinder SC80X1100SH Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X1100SH |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 1100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X1100SH
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×1100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X1100SH Is Used
High-Temperature Process Automation
With Viton seals rated to 150 °C, this cylinder reliably operates in autoclaves, drying ovens, and hot pressing machinery where standard seals would fail.
Long-Stroke Material Handling
The 1100 mm stroke is ideal for pushing heavy pallets or transferring large components between conveyor lines in logistics and distribution centers.
Sensor-Controlled Assembly Fixtures
The built-in magnet allows CMSG/DMSG sensors to provide real-time position feedback, perfect for automated welding jigs or clamping stations requiring cycle verification.
Is the Airtac SC80 Standard Cylinder SC80X1100SH the Right Cylinder?
For applications needing less force, stepping down to a 63 mm bore reduces push force to 1559 N at 0.5 MPa. If a higher force is required, the 100 mm bore provides 3927 N at the same pressure. At 1100 mm of stroke, the 25 mm rod is susceptible to bending under side loads; always use an external guide or linear rail to protect the rod bearings and ensure long seal life.
To replace an existing cylinder, match five points: 80 mm bore, 1100 mm stroke, PT port thread, the built-in magnet for sensor compatibility, and the Viton seal material. This is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X1100SH FAQ
At 0.5 MPa air pressure, the cylinder provides 2513 N pushing and 2268 N pulling force. At the maximum operating pressure of 0.9 MPa, the pushing force increases to 4523 N.
No. The AirTAC SC series is a tie-rod cylinder with a shorter overall body length than an ISO 15552 profile cylinder. It is not dimensionally interchangeable. It must replace another AirTAC SC tie-rod cylinder with matching bore, stroke, port thread, magnet option, and seal material.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X1100SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.