Airtac SC80 Standard Cylinder SC80X1100SN
The AirTAC SC80 Standard Cylinder SC80X1100SN is a genuine double-acting standard air cylinder with a Ø80mm bore and 1100mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke1100 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X1100SN
The AirTAC SC80X1100SN is a double-acting tie-rod cylinder delivering 2513 N of push force at 0.5 MPa (4523 N at the 0.9 MPa maximum operating pressure). Its 1100 mm stroke suits long-transfer applications within the bore's 1500 mm standard limit, driven by a 25 mm diameter piston rod with M20x1.5 male threads.
The built-in magnet (-S suffix) allows CMSG/DMSG/EMSG reed or solid-state sensors to clamp directly onto the barrel for non-contact position sensing. Nitrile (NBR) seals (-N suffix) provide reliable sealing across the standard -20 to +70 °C range, with PT1/8 ports and a 28 mm adjustable air cushion at each end to decelerate the load.
Airtac SC80 Standard Cylinder SC80X1100SN Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X1100SN |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 1100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X1100SN
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×1100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X1100SN Is Used
Long-Stroke Material Transfer
The 1100 mm stroke pushes or pulls parts between distant conveyor lanes or workstations, with sensor feedback confirming end-of-travel.
Automated Pallet Dispensing
Ejects empty pallets from a stack with a controlled 2513 N push, using the adjustable cushion to soften the impact at the end of the long stroke.
Bulk Bag Filling Station
Positions a filling head over a wide bag mouth. The magnetic piston allows sensors to sequence the fill-and-index steps accurately.
Is the Airtac SC80 Standard Cylinder SC80X1100SN the Right Cylinder?
For a higher force at the same pressure, step up to the 100 mm bore SC100 series, which provides 3927 N at 0.5 MPa. For a lighter, more compact solution, the 63 mm bore SC63 offers 1559 N. This 1100 mm stroke is long; ensure the rod is externally guided or the load is perfectly axial to prevent rod bending and premature bearing wear. To match this exact configuration for replacement, confirm five points: 80 mm bore, 1100 mm stroke, PT port thread, built-in magnet (-S), and NBR seals (-N).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X1100SN FAQ
At 0.5 MPa it produces 2513 N extending and 2268 N retracting. At the maximum operating pressure of 0.9 MPa, the extending thrust reaches 4523 N.
Yes. The -S suffix indicates a built-in magnet, so AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors can be clamped directly onto the tie-rod barrel to detect piston position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X1100SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.