Airtac SC80 Standard Cylinder SC80X110FA
The AirTAC Airtac SC80 Standard Cylinder SC80X110FA is a genuine double-acting standard air cylinder with a Ø80mm bore and 110mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke110 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X110FA
The SC80X110FA is a double-acting pneumatic cylinder from the AirTAC SC tie-rod series, combining an 80 mm bore with a 110 mm stroke. At 0.5 MPa, it generates a push force of 2513 N, making it a capable mid-range actuator for pressing, clamping, and transfer tasks.
This model is configured with a front rectangular flange (FA) for rigid end-face mounting, and the standard PT1/8 port thread. The 25 mm diameter piston rod and 28 mm adjustable air cushion at each end ensure smooth deceleration, while the TPU seals support operation from -20 to +70 °C.
Airtac SC80 Standard Cylinder SC80X110FA Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X110FA |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X110FA
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X110FA Is Used
Pneumatic Press Frames
The 2513 N push force at 0.5 MPa and front flange mount make this cylinder ideal for small benchtop presses used in assembly, staking, or riveting operations.
Part Transfer & Stops
With a 110 mm stroke, it effectively acts as a transfer pusher or lane diverter on conveyor lines, moving totes or cartons between belts.
Clamping & Fixturing
The rigid FA flange mounting ensures precise, repeatable positioning for work-holding fixtures in CNC machining, welding, or test stations.
Is the Airtac SC80 Standard Cylinder SC80X110FA the Right Cylinder?
For applications needing more force, stepping up to the SC100 bore provides 3927 N of push at 0.5 MPa. If space is tight and 2513 N is sufficient, the SC63 bore delivers 1559 N. The front flange mount (FA) rigidly secures the cylinder to a panel or machine frame, resisting axial misalignment.
When replacing this cylinder, match five key points: 80 mm bore, 110 mm stroke, PT port thread, the F-SC80FA front flange accessory, and the absence of a magnet. This ensures the new unit fits the existing mounting holes and pneumatic circuit without modification.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X110FA FAQ
At 0.7 MPa operating pressure, the 80 mm bore generates a theoretical push force of 3518 N. The pull force on the retract stroke is 2268 N at 0.5 MPa, due to the area reduction from the 25 mm rod.
Yes. The SC80 body is compatible with all F-SC80 mounting accessories, including foot (LB), rear flange (FB), rear clevis (CA/CB), and centre trunnion (TC). You can swap the FA flange for another type if your application requirements change.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X110FA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.