Airtac SC80 Standard Cylinder SC80X110FB
The AirTAC Airtac SC80 Standard Cylinder SC80X110FB is a genuine double-acting standard air cylinder with a Ø80mm bore and 110mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke110 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X110FB
The SC80X110FB is an 80 mm bore double-acting pneumatic cylinder delivering 2513 N of push force at 0.5 MPa (up to 4523 N at 0.9 MPa). Its 110 mm stroke suits medium-reach clamping and pressing tasks, while the 25 mm diameter piston rod provides excellent rigidity against bending.
This model includes an FB rear rectangular flange (F-SC80FB) for secure end-face mounting. The standard TPU seals and PT3/8 ports keep it compatible with common filtered-air systems. With a 28 mm adjustable air cushion and a compact body length of 182 mm, it fits neatly into machine frames where space behind the cap is limited.
Airtac SC80 Standard Cylinder SC80X110FB Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X110FB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X110FB
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X110FB Is Used
Parcel Sorting Gates
The 110 mm stroke and rear flange mount allow the SC80X110FB to actuate diverter gates on conveyor lines, handling the 2513 N force needed to redirect medium-weight packages reliably.
Press-Fit Assembly
Delivering up to 4523 N at 0.9 MPa, this cylinder provides the controlled push for bearing or bushing insertion in automated assembly cells, with the FB flange ensuring rigid alignment.
Clamp & Hold Fixtures
Use the rear flange mount to bolt the cylinder directly to a welding or machining fixture. The 28 mm cushion absorbs impact during rapid clamp cycling, protecting the tooling.
Is the Airtac SC80 Standard Cylinder SC80X110FB the Right Cylinder?
Choose the SC80 when the SC63's 1559 N push force at 0.5 MPa is marginal for your load. If you need even higher force, the SC100 delivers 3927 N at the same pressure. For this 110 mm stroke, side loads are moderate, but always align the rod with the load axis to prevent seal wear. When replacing an existing cylinder, match five points: 80 mm bore, 110 mm stroke, PT3/8 ports, FB rear flange mounting, and the non-magnetic piston (no -S suffix).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X110FB FAQ
At the standard 0.5 MPa operating pressure, push force is 2513 N and pull force is 2268 N. At the maximum 0.9 MPa operating pressure, push force reaches 4523 N. These values assume a static load; always factor in a speed-dependent margin.
Yes, the FB suffix specifies a rear rectangular flange (part F-SC80FB) bolted to the head cap. It is designed to take the full thrust reaction force. Ensure the mating surface is flat and rigid to avoid misalignment.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X110FB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.