Airtac SC80 Standard Cylinder SC80X110S
The AirTAC Airtac SC80 Standard Cylinder SC80X110S is a genuine double-acting standard air cylinder with a Ø80mm bore and 110mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke110 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X110S
The AirTAC SC80X110S is a double-acting tie-rod cylinder with an 80 mm bore and 110 mm stroke, pre-equipped with a built-in magnet. This -S suffix allows CMSG, DMSG, or EMSG reed and solid-state sensors to clamp directly onto the barrel for contactless position sensing, simplifying automation integration without external brackets.
At 0.5 MPa air pressure it generates 2513 N pushing force, rising to 4523 N at 0.9 MPa. The 25 mm diameter piston rod and 28 mm adjustable air cushion at each end provide robust deceleration for mid-stroke loads. The body length A is 182 mm, giving a total extended length of approximately 292 mm.
Airtac SC80 Standard Cylinder SC80X110S Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X110S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X110S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X110S Is Used
Package Sorting Gate
Actuates a diverter arm on a conveyor line. The built-in magnet with DMSG sensors provides precise end-of-stroke confirmation to the PLC at high cycle rates.
Clamp & Weld Fixture
Applies 2513 N clamping force at 0.5 MPa to hold steel fabrications during robotic welding. The magnetic piston lets CMSG sensors verify clamp closure before the arc starts.
Pallet Stop & Release
Controls a heavy-duty pallet stop in a gravity roller lane. EMSG solid-state sensors withstand the repetitive impact environment, signaling pallet presence and cylinder state.
Is the Airtac SC80 Standard Cylinder SC80X110S the Right Cylinder?
This 80 mm bore suits applications needing around 2500 N at standard shop pressure. If your load is under 1600 N, stepping down to a 63 mm bore (1559 N at 0.5 MPa) can reduce air consumption; for loads above 3500 N, consider the 100 mm bore (3927 N at 0.5 MPa).
The 110 mm stroke is well within the 1500 mm maximum standard stroke for this bore. For a direct replacement, match five points: 80 mm bore, 110 mm stroke, PT port thread, the built-in magnet (-S), and your existing mounting accessory. This model ships without a mounting bracket; add an FA, FB, CA, CB, LB, or TC kit separately if needed.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X110S FAQ
At 0.5 MPa: push force is 2513 N, pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, push force reaches 4523 N. The theoretical maximum at 1.0 MPa is 513 kgf.
Yes, the SC80X110S is dimensionally identical to a standard SC80X110. The built-in magnet does not change the envelope or port locations. You gain the ability to add clamp-on sensors immediately, but the cylinder will function identically without them.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X110S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.