Airtac SC80 Standard Cylinder SC80X110TC
The AirTAC Airtac SC80 Standard Cylinder SC80X110TC is a genuine double-acting standard air cylinder with a Ø80mm bore and 110mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke110 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X110TC
The SC80X110TC is an 80 mm bore, 110 mm stroke double-acting tie-rod cylinder delivering 2513 N push force at 0.5 MPa (4523 N at 0.9 MPa). Its 25 mm diameter piston rod and 28 mm adjustable air cushion suit medium-duty linear tasks where controlled deceleration matters.
This model ships with a TC centre trunnion mount and the TCM1 bracket (part code F-SC80TC), allowing the cylinder to pivot during actuation. The body length A is 182 mm, giving a total extended length of approximately 292 mm. Standard PT ports and TPU seals cover a -20 to +70 °C operating range.
Airtac SC80 Standard Cylinder SC80X110TC Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X110TC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X110TC
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X110TC Is Used
Conveyor Diverter Gates
The 2513 N push force at 0.5 MPa easily shifts medium-weight packages. The TC centre trunnion mount lets the cylinder body pivot as the gate arm swings through its arc.
Clamping & Fixturing
110 mm stroke provides ample travel for part clamping in machining centres. Adjustable cushioning at both ends protects the fixture from impact shock during rapid cycling.
Agricultural Machinery Linkages
The trunnion mount suits pivoting linkages on harvesters or spreaders. TPU seals and robust tie-rod construction handle dusty, outdoor conditions within the -20 to +70 °C range.
Is the Airtac SC80 Standard Cylinder SC80X110TC the Right Cylinder?
For higher force, the SC100 bore steps up to 3927 N push at 0.5 MPa; for a lighter, faster option, the SC63 provides 1559 N. The 110 mm stroke is well within the 1500 mm maximum standard stroke for bore 80. When replacing, match bore, stroke, PT port thread, TC centre-trunnion mounting, and the absence of a magnet — this cylinder does not carry the -S magnet option, so barrel-mounted sensors require a separate external bracket.
At 110 mm stroke the rod is well-supported, but if side loads are present in the application, an external guide rail or guided cylinder should be considered to protect the rod bearing from bending moments.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X110TC FAQ
At 0.7 MPa (7 bar) the push force is 3518 N and the pull force is 2268 N. The maximum operating pressure is 1.0 MPa, delivering 4523 N push force.
No. The SC series is a tie-rod cylinder with a shorter body length than an ISO 15552 profile cylinder, so mounting dimensions and overall length differ. It is a direct replacement only for another AirTAC SC80 tie-rod cylinder with matching bore, stroke, PT ports, and TC trunnion mount.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X110TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.