Airtac SC80 Standard Cylinder SC80X1110S
The AirTAC Airtac SC80 Standard Cylinder SC80X1110S is a genuine double-acting standard air cylinder with a Ø80mm bore and 1110mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke1110 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X1110S
The AirTAC SC80X1110S is a double-acting tie-rod cylinder with an 80 mm bore and a 1110 mm stroke, delivering a push force of 2513 N at 0.5 MPa and up to 4523 N at 0.9 MPa. Its 25 mm diameter piston rod and 28 mm adjustable air cushion provide reliable deceleration for mid-to-heavy linear motion tasks.
The built-in magnet (-S suffix) allows direct mounting of CMSG, DMSG, or EMSG sensors on the barrel for contactless position feedback. With a body length A of 182 mm and PT3/8 ports, this genuine AirTAC actuator is a practical choice for automation engineers needing long-stroke sensing capability.
Airtac SC80 Standard Cylinder SC80X1110S Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X1110S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 1110 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X1110S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×1110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X1110S Is Used
Long-Reach Part Transfer
The 1110 mm stroke moves components between distant conveyor stations, with the magnet enabling end-of-stroke confirmation for interlocking logic.
Pallet Layer Forming
Pushes rows of boxes onto a pallet stack. The 2513 N force at 0.5 MPa handles heavy cardboard or light wooden crates efficiently.
Automated Glue Dispensing
Traverses a glue head across large panels. The -S magnet provides real-time position data to the PLC for precise bead start and stop points.
Is the Airtac SC80 Standard Cylinder SC80X1110S the Right Cylinder?
Choose the SC80 bore when your application requires between 2513 N and 4523 N of push force. If the load is lighter, stepping down to a 63 mm bore reduces air consumption while still providing 1559 N at 0.5 MPa. For heavier loads, the 100 mm bore offers 3927 N at the same pressure.
At 1110 mm of stroke, rod bending under side load is a critical consideration. Always use an external guide or a guided cylinder to prevent bearing damage and seal wear. When replacing this cylinder, match all five key points: 80 mm bore, 1110 mm stroke, PT3/8 port thread, the built-in magnet (-S), and the basic mounting style.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X1110S FAQ
At the standard operating pressure of 0.7 MPa, the push force is 3518 N and the pull force is 2268 N. The maximum push force at 0.9 MPa is 4523 N.
For a 1110 mm stroke, side loads can easily bend the 25 mm rod. Install an external linear guide rail parallel to the cylinder to absorb transverse forces, or consider a guided cylinder assembly to protect the rod bearings and seals.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X1110S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.