Airtac SC80 Standard Cylinder SC80X1160S
The AirTAC Airtac SC80 Standard Cylinder SC80X1160S is a genuine double-acting standard air cylinder with a Ø80mm bore and 1160mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke1160 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X1160S
The AirTAC SC80X1160S is an 80 mm bore, 1160 mm stroke double-acting pneumatic cylinder with a built-in magnet for sensor mounting. It delivers a push force of 2513 N at 0.5 MPa and up to 4523 N at the maximum operating pressure of 0.9 MPa, making it a robust actuator for mid-range linear applications.
This model features a 25 mm diameter piston rod and a 28 mm adjustable air cushion at each end to decelerate the piston smoothly. The -S suffix indicates an integrated magnet, allowing CMSG, DMSG, or EMSG reed and solid-state sensors to be clamped directly onto the tie-rod barrel for precise end-of-stroke detection.
Airtac SC80 Standard Cylinder SC80X1160S Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X1160S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 1160 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X1160S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×1160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X1160S Is Used
Material Handling
Operating a long-stroke diverter gate on a conveyor line, where the 1160 mm reach is needed and the integrated magnet provides sensor feedback.
Automated Assembly
Pushing a component carrier across an assembly station, using the 2513 N force at 0.5 MPa and the -S magnet for cycle confirmation.
Packaging Machinery
Actuating a long-travel compression plate in a baler or compactor, benefiting from the tie-rod design's serviceability in dusty environments.
Is the Airtac SC80 Standard Cylinder SC80X1160S the Right Cylinder?
For applications requiring a higher force output, stepping up to the 100 mm bore SC100 series provides a push force of 3927 N at the same 0.5 MPa pressure. If a shorter, more compact cylinder is acceptable, the 63 mm bore SC63 offers 1559 N. At an 1160 mm stroke, ensure the load is guided externally to prevent excessive bending stress on the 25 mm rod and internal bearings. A direct replacement must match the 80 mm bore, 1160 mm stroke, PT port thread, integrated magnet, and basic mounting configuration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X1160S FAQ
At 0.5 MPa (5 bar), the push force is 2513 N and the pull force on the retract stroke is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 4523 N.
Yes, the -S suffix designates a built-in magnet around the piston. This allows AirTAC CMSG, DMSG, or EMSG series sensors to be mounted externally on the tie-rod barrel for contactless position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X1160S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.