Airtac SC80 Standard Cylinder SC80X1175S
The AirTAC Airtac SC80 Standard Cylinder SC80X1175S is a genuine double-acting standard air cylinder with a Ø80mm bore and 1175mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke1175 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X1175S
The AirTAC SC80X1175S is a double-acting tie-rod cylinder with an 80 mm bore and a long 1175 mm stroke, delivering a push force of 2513 N at 0.5 MPa and up to 4523 N at the maximum operating pressure of 0.9 MPa. This model features a 25 mm diameter piston rod and a 28 mm adjustable air cushion at each end to decelerate the moving mass smoothly, protecting end-cap components during high-cycle operation.
Equipped with a built-in magnet (-S suffix), this cylinder is ready for direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors on the barrel, enabling precise, non-contact position sensing without additional brackets. The standard PT3/8 ports and TPU seals provide reliable performance in ambient temperatures from -20 to +70 °C, making it a robust choice for demanding linear motion tasks.
Airtac SC80 Standard Cylinder SC80X1175S Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X1175S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 1175 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X1175S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×1175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X1175S Is Used
Pallet Transfer Systems
The 1175 mm stroke moves pallets across wide transfer stations, with the 2513 N push force at 0.5 MPa easily handling loaded pallet weights in logistics hubs.
Automated Gluing & Sealing
Long-reach linear motion applies adhesive beads across large panels. The built-in magnet allows multi-point sensor positioning to verify full stroke completion.
Long-Stroke Part Ejection
Pushes finished parts off a wide conveyor line. The adjustable cushion absorbs the energy of the moving load at the end of the 1175 mm travel, reducing noise and vibration.
Is the Airtac SC80 Standard Cylinder SC80X1175S the Right Cylinder?
Select the SC80X1175S when your application requires a force between the SC63 (1559 N at 0.5 MPa) and the SC100 (3927 N at 0.5 MPa). This 80 mm bore cylinder is a popular mid-range workhorse for material handling and pressing operations. For strokes over 300 mm, always evaluate side-loading conditions; a 25 mm rod extending 1175 mm is susceptible to bending under radial forces, and an external guide or a guided cylinder configuration is strongly recommended to protect the rod bearings and ensure linear accuracy.
To replace an existing unit, match five key points: the 80 mm bore, the 1175 mm stroke, the PT3/8 port thread, the built-in magnet for sensor compatibility, and the basic (footless) mounting style. This is a tie-rod cylinder, not an ISO 15552 profile, so dimensional interchangeability is limited to other AirTAC SC80 series cylinders of the same configuration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X1175S FAQ
At 0.7 MPa (7 bar), the push force is 3518 N. At the maximum operating pressure of 0.9 MPa, the force increases to 4523 N. The theoretical maximum force at 1.0 MPa is 513 kgf.
Yes. The -S suffix designates a built-in magnet in the piston, allowing AirTAC CMSG, DMSG, or EMSG sensors to be clamped directly onto the tie-rod barrel for end-of-stroke or intermediate position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X1175S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.