Airtac SC80 Standard Cylinder SC80X130
The AirTAC Airtac SC80 Standard Cylinder SC80X130 is a genuine double-acting standard air cylinder with a Ø80mm bore and 130mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke130 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X130
The SC80X130 is a genuine AirTAC double-acting tie-rod cylinder with an 80 mm bore and 130 mm stroke, delivering a push force of 2513 N at 0.5 MPa (4523 N at 0.9 MPa). Its 25 mm diameter piston rod and 28 mm adjustable air cushion provide smooth deceleration for medium-duty linear tasks.
With a compact body length A of 182 mm, the total extended length reaches approximately 312 mm. The PT3/8 port and M20x1.5 rod thread suit standard pneumatic connections, while the TPU seals ensure reliable operation from -20 to +70 °C.
Airtac SC80 Standard Cylinder SC80X130 Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X130 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X130
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X130 Is Used
Product Diverting
Provides the 2513 N push force at 0.5 MPa needed to reliably divert medium-weight packages on conveyor lines, with adjustable cushioning for smooth, impact-free stops.
Clamping & Fixturing
Delivers consistent clamping force for CNC machining fixtures and welding jigs. The 25 mm rod resists bending under axial load, ensuring repeatable part positioning.
Press-Fit Assembly
Ideal for pressing bushings or bearings into housings. The 4523 N maximum thrust at 0.9 MPa handles light to medium interference fits in automated assembly cells.
Is the Airtac SC80 Standard Cylinder SC80X130 the Right Cylinder?
Choose the SC80X130 when your application needs around 2500 N of push force. If you require less force, step down to the SC63 series (1559 N at 0.5 MPa); for heavier loads, the SC100 offers 3927 N at the same pressure. Always match the bore, 130 mm stroke, PT3/8 port thread, and mounting style when replacing an existing cylinder.
For strokes of 130 mm, side loading is generally manageable, but avoid applying direct radial force to the rod. If your load path is not perfectly axial, consider an external guide rail or a guided cylinder to protect the rod bearing and seals from premature wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X130 FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 4523 N. The theoretical maximum force at 1.0 MPa is 513 kgf.
No. The AirTAC SC series is a tie-rod cylinder and is physically shorter than an ISO 15552 profile cylinder, so it is not dimensionally interchangeable. It directly replaces another AirTAC SC80 cylinder with the same stroke, port thread (PT3/8), and mounting configuration.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X130
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.