Airtac SC80 Standard Cylinder SC80X1300
The AirTAC Airtac SC80 Standard Cylinder SC80X1300 is a genuine double-acting standard air cylinder with a Ø80mm bore and 1300mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke1300 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X1300
The AirTAC SC80X1300 is a double-acting tie-rod cylinder delivering a push force of 2513 N at 0.5 MPa and up to 4523 N at 0.9 MPa operating pressure. With an 80 mm bore and a 25 mm diameter piston rod, this model provides a substantial force class suitable for medium-to-heavy linear actuation tasks where a long working reach is essential.
This cylinder features a 1300 mm stroke, well within the 1500 mm maximum standard stroke for the 80 mm bore. The total extended body length is approximately 1482 mm (body length A of 182 mm plus the stroke). It includes PT3/8 port threads, an M20x1.5 rod thread, and a 28 mm adjustable air cushion to decelerate the piston smoothly at end-of-travel.
Airtac SC80 Standard Cylinder SC80X1300 Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X1300 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 1300 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X1300
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×1300 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X1300 Is Used
Long-Reach Material Transfer
Pushes or pulls heavy totes and pallets across wide conveyor gaps or transfer stations, utilizing the full 1300 mm stroke for extended reach.
Industrial Press Feed
Advances large sheet materials or heavy components into stamping presses or CNC machining centers with consistent force and long travel.
Agricultural Equipment Actuation
Operates large gates, chutes, or sorting mechanisms on harvesters and processing lines, providing reliable force in dusty environments.
Is the Airtac SC80 Standard Cylinder SC80X1300 the Right Cylinder?
Select the SC80 bore when your application requires between 2513 N and 4523 N of force. If your load is lighter, stepping down to the SC63 bore (1559 N at 0.5 MPa) can reduce air consumption and physical size. For higher force demands, the SC100 bore provides 3927 N at 0.5 MPa.
For this 1300 mm stroke, carefully evaluate side-loading conditions. A long, unsupported 25 mm rod is susceptible to bending under lateral forces. Use an external linear guide or a guided cylinder assembly to protect the rod bearing and ensure reliable operation. When replacing an existing cylinder, match the 80 mm bore, 1300 mm stroke, PT3/8 port thread, basic mounting configuration, and the absence of a magnet sensor option.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X1300 FAQ
At the standard 0.5 MPa operating pressure, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 4523 N.
Yes, 1300 mm is a standard stroke for the 80 mm bore (max standard is 1500 mm). For any stroke over 300 mm, an external guide rail or rod support is strongly recommended to prevent side-load damage to the rod bearing and piston seals.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X1300
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.