Airtac SC80 Standard Cylinder SC80X1300S
The AirTAC Airtac SC80 Standard Cylinder SC80X1300S is a genuine double-acting standard air cylinder with a Ø80mm bore and 1300mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke1300 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X1300S
The AirTAC SC80X1300S is a double-acting single-rod pneumatic cylinder delivering a push force of 2513 N at 0.5 MPa and up to 4523 N at 0.9 MPa operating pressure. With an 80 mm bore and a substantial 1300 mm stroke, this model features a 25 mm diameter piston rod and a 28 mm adjustable air cushion at each end to decelerate high-inertia loads smoothly.
This cylinder includes a built-in magnet, designated by the -S suffix, allowing direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors along the barrel for precise, non-contact position feedback. The body length A is 182 mm, giving an extended length of approximately 1482 mm, making it suitable for long-reach material transfer and handling operations.
Airtac SC80 Standard Cylinder SC80X1300S Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X1300S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 1300 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X1300S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×1300 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X1300S Is Used
Long-Stroke Pallet Transfer
The 1300 mm stroke and 2513 N push force at 0.5 MPa efficiently move heavy pallets across wide roller conveyors in automated warehousing, with the magnet enabling end-of-stroke confirmation.
Automated Panel Feeding
Feeds large wood or metal panels into CNC machines. The adjustable cushion decelerates the heavy load at stroke end, while sensors confirm the panel is fully loaded before machining starts.
Diverting Gate Actuation
Actuates a long-throw diveter gate on a high-capacity conveyor line. The 4523 N force at 0.9 MPa provides the torque needed to divert heavy packages reliably, with sensor feedback for gate position.
Is the Airtac SC80 Standard Cylinder SC80X1300S the Right Cylinder?
Choose the SC80 bore when your application requires a push force between 2513 N and 4523 N, a significant step up from the 50 mm bore's 982 N at 0.5 MPa. If your load is lighter, stepping down to a 63 mm bore (1559 N at 0.5 MPa) can reduce air consumption and physical size. For strokes of 300 mm or more, like this 1300 mm model, always assess side-loading risks; the long, unsupported 25 mm rod is susceptible to bending under radial force. Use an external linear guide or switch to a guided cylinder to protect the rod bearings and seals.
To ensure a direct, trouble-free replacement, match these five points exactly: 80 mm bore, 1300 mm stroke, PT port thread, the built-in magnet (-S) for sensor compatibility, and your required mounting accessory. This SC series is a tie-rod design and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X1300S FAQ
The theoretical push force is 2513 N at 0.5 MPa, 3518 N at 0.7 MPa, and 4523 N at the maximum operating pressure of 0.9 MPa. The pull force on the rod retraction stroke is 2268 N at 0.5 MPa due to the area of the 25 mm rod.
A 1300 mm stroke with a 25 mm rod is highly susceptible to bending under side loads. The cylinder must be mounted so the load is purely axial. For any radial force, you must integrate an external linear guide rail to carry the side load, preventing premature rod bearing wear, seal failure, and rod damage.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X1300S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.