Airtac SC80 Standard Cylinder SC80X1300TC
The AirTAC Airtac SC80 Standard Cylinder SC80X1300TC is a genuine double-acting standard air cylinder with a Ø80mm bore and 1300mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke1300 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X1300TC
The AirTAC SC80X1300TC is a double-acting pneumatic cylinder delivering 2513 N of push force at 0.5 MPa and up to 4523 N at the maximum operating pressure of 0.9 MPa. This model features an 80 mm bore paired with a 25 mm diameter piston rod and a long 1300 mm stroke, making it well-suited for applications requiring extended linear travel with substantial force.
Equipped with a TC centre trunnion mount (supplied with the TCM1 bracket, part code F-SC80TC), this cylinder is designed to pivot during operation, accommodating swinging or arcing loads. The adjustable pneumatic cushion, with a 28 mm cushion length, decelerates the piston smoothly at both ends of the stroke, reducing impact and noise in high-cycle applications.
Airtac SC80 Standard Cylinder SC80X1300TC Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X1300TC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 1300 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X1300TC
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×1300 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X1300TC Is Used
Conveyor Diverter Gates
The 1300 mm stroke and pivoting TC mount allow this cylinder to actuate long-throw diverter gates on wide conveyor systems, sorting packages or materials with a powerful 4523 N push.
Welding Fixture Clamping
Provides consistent, high-force clamping for large automotive or structural welding jigs. The trunnion mount lets the cylinder swing into position, while the 28 mm cushion absorbs the shock of rapid actuation.
Agricultural Implement Control
Controls the angle or height of heavy tillage tools or harvester headers. The robust tie-rod construction and 25 mm rod withstand harsh outdoor environments, delivering reliable 2513 N of force at standard 0.5 MPa compressor pressure.
Is the Airtac SC80 Standard Cylinder SC80X1300TC the Right Cylinder?
Select the SC80 when your application requires a force between the SC63 (2805 N at 0.9 MPa) and the SC100 (7068 N at 0.9 MPa). For this 1300 mm stroke, which is within the 1500 mm maximum standard stroke for the 80 mm bore, ensure the load is guided externally if significant side forces are present; a long, unsupported 25 mm rod can be susceptible to bending under lateral loads. For direct replacement, match the 80 mm bore, 1300 mm stroke, PT port thread, TC centre trunnion mounting, and the non-magnetic piston configuration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X1300TC FAQ
At the standard 0.5 MPa operating pressure, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 4523 N. The theoretical maximum force at 1.0 MPa is 513 kgf.
No. The SC80X1300TC is a standard double-acting cylinder and will not hold its position if air pressure is exhausted or lost. The piston will drift or the load will drop. The adjustable air cushion only decelerates the piston at the stroke ends to reduce impact; it is not a locking or braking mechanism. For load holding, you must add an external mechanical lock, a rod brake, or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X1300TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.