Airtac SC80 Standard Cylinder SC80X130S
The AirTAC Airtac SC80 Standard Cylinder SC80X130S is a genuine double-acting standard air cylinder with a Ø80mm bore and 130mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke130 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X130S
The AirTAC SC80X130S is a double-acting tie-rod cylinder with an 80 mm bore and 130 mm stroke, factory-equipped with a built-in magnet for direct mounting of CMSG, DMSG, or EMSG sensors. At 0.5 MPa it generates 2513 N pushing force and 2268 N pulling force, rising to 4523 N at the 0.9 MPa maximum operating pressure, making it a solid mid-range actuator for general automation.
This model uses a 25 mm diameter piston rod with M20x1.5 male threads and PT3/8 ports. The adjustable air cushion at each end (28 mm cushion length) decelerates the piston smoothly, while the TPU/NBR seals support an operating temperature range of -20 to +70 °C. The body length A is 182 mm, giving a total extended length of approximately 312 mm.
Airtac SC80 Standard Cylinder SC80X130S Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X130S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X130S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X130S Is Used
Conveyor Diverter Gates
The 2513 N push force at 0.5 MPa easily actuates diverter flaps and sorting gates on medium-duty package handling lines, with the magnetic piston enabling end-of-stroke position confirmation via CMSG sensors.
Clamping & Fixturing
Ideal for pneumatic clamping stations in CNC machining or welding jigs, where the 80 mm bore provides ample holding force and the built-in magnet allows sensor-based clamp/unclamp verification.
Pallet Stop & Lift Mechanisms
Used in palletising cells to raise stops or lift short transfer sections. The 130 mm stroke offers enough travel for pallet engagement, and the adjustable cushion reduces impact noise at end-of-stroke.
Is the Airtac SC80 Standard Cylinder SC80X130S the Right Cylinder?
Select the SC80X130S when the 63 mm bore's 1559 N at 0.5 MPa is insufficient but the 100 mm bore's 3927 N is oversized for your load. For strokes of 130 mm the rod is well-supported within the standard stroke envelope; however, if side loads are present, consider an external linear guide or a guided cylinder to protect the rod bearing and seals.
To replace an existing cylinder, match five points exactly: 80 mm bore, 130 mm stroke, PT3/8 port thread, the built-in magnet (-S suffix), and the basic mounting style. This SC tie-rod design is shorter than an ISO 15552 cylinder and is not dimensionally interchangeable with that standard.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X130S FAQ
At 0.5 MPa the pushing force is 2513 N and pulling force is 2268 N. At 0.7 MPa push rises to 3518 N, and at the maximum operating pressure of 0.9 MPa it reaches 4523 N. The theoretical maximum at 1.0 MPa is 513 kgf.
Yes. The -S suffix in SC80X130S indicates a built-in magnet on the piston. This lets you clamp AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the barrel tie-rods for contactless position sensing without any additional brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X130S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.