Airtac SC80 Standard Cylinder SC80X130TC
The AirTAC Airtac SC80 Standard Cylinder SC80X130TC is a genuine double-acting standard air cylinder with a Ø80mm bore and 130mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke130 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X130TC
The SC80X130TC is a double-acting pneumatic cylinder delivering 2513 N of push force at 0.5 MPa and up to 4523 N at 0.9 MPa operating pressure. Its 25 mm diameter piston rod and 28 mm adjustable air cushion at each end provide smooth deceleration for mid-range automation tasks.
This model includes the TC centre trunnion mounting, supplied complete with the TCM1 bracket (part code F-SC80TC), allowing the cylinder to pivot during operation. The 130 mm stroke fits compact linear transfer and clamping applications, with a total extended body length of approximately 312 mm.
Airtac SC80 Standard Cylinder SC80X130TC Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X130TC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X130TC
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X130TC Is Used
Conveyor Diverters
The pivoting action of the trunnion-mounted SC80X130TC smoothly actuates gates or pushers on packaging lines, handling 2513 N of force at standard plant pressure.
Clamping Fixtures
Delivers a controlled 4523 N clamping force at 0.9 MPa for welding or assembly jigs, with the trunnion mount allowing the cylinder body to self-align.
Agricultural Machinery
Operates chute doors or flow control gates on seeders and spreaders, where the centre pivot accommodates the arc of movement and resists dusty conditions.
Is the Airtac SC80 Standard Cylinder SC80X130TC the Right Cylinder?
For higher force, step up to the SC100 bore offering 3927 N push at 0.5 MPa; for a lighter, more compact solution the SC63 bore provides 1559 N. The centre trunnion mount is ideal for swinging or pivoting loads, but ensure the pivot axis is aligned to avoid binding. When replacing an existing cylinder, match all five key points: 80 mm bore, 130 mm stroke, PT port thread, TC centre trunnion mounting, and the absence of a magnet sensor option.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X130TC FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 4523 N.
Yes, the TC code means the centre trunnion is supplied together with the TCM1 mounting bracket as a set. The accessory part code for this assembly is F-SC80TC. It cannot be added to a standard cylinder later without disassembly.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X130TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.