Airtac SC80 Standard Cylinder SC80X1325S
The AirTAC Airtac SC80 Standard Cylinder SC80X1325S is a genuine double-acting standard air cylinder with a Ø80mm bore and 1325mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke1325 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X1325S
The AirTAC SC80X1325S is a double-acting pneumatic cylinder with an 80 mm bore and a non-standard 1325 mm stroke, factory-built with a built-in magnet for sensor compatibility. At 0.5 MPa, it provides a push force of 2513 N, scaling up to 4523 N at 0.9 MPa, making it a strong choice for long linear movements.
This tie-rod cylinder features a 25 mm diameter piston rod and PT3/8 ports, with a body length A of 182 mm. The adjustable air cushion (28 mm length) decelerates the piston at stroke ends, and the integrated magnet allows direct mounting of CMSG/DMSG/EMSG sensors for precise position feedback on the barrel.
Airtac SC80 Standard Cylinder SC80X1325S Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X1325S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 1325 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X1325S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×1325 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X1325S Is Used
Long-Reach Material Transfer
The 1325 mm stroke moves parts between distant conveyor lines or workstations, with the built-in magnet confirming end-of-stroke positions via sensors.
Automated Gluing or Dispensing
Provides a smooth, controlled long stroke for applying adhesive beads or sealant across large panels, with adjustable cushioning to prevent fluid sloshing at stop.
Vertical Pallet Lift Assist
Delivers 2513 N of push force at 0.5 MPa to raise or lower pallets in a compact lift station, where the long stroke handles significant vertical travel.
Is the Airtac SC80 Standard Cylinder SC80X1325S the Right Cylinder?
For applications needing more force, stepping up to the 100 mm bore SC100 series provides 3927 N at 0.5 MPa. If a shorter, standard stroke is acceptable, the SC80 series offers standard strokes up to 1500 mm. This 1325 mm stroke is a non-standard, made-to-order length.
At this stroke length, the 25 mm rod is susceptible to bending under side loads. It is critical to use an external guide system or ensure the load is perfectly axial to prevent rod bearing damage. For direct replacement, match the 80 mm bore, 1325 mm stroke, PT3/8 port thread, and the -S magnet option.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X1325S FAQ
At the standard 0.7 MPa operating pressure, the push force is 3518 N. The maximum push force at 0.9 MPa is 4523 N. The theoretical force at 1.0 MPa is 513 kgf.
The -S suffix indicates a magnet is built into the piston. This allows you to clamp AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the cylinder barrel to detect piston position without additional brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X1325S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.