Airtac SC80 Standard Cylinder SC80X1330SN
The AirTAC Airtac SC80 Standard Cylinder SC80X1330SN is a genuine double-acting standard air cylinder with a Ø80mm bore and 1330mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke1330 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X1330SN
The AirTAC SC80X1330SN is a double-acting tie-rod cylinder delivering 2513 N of push force at 0.5 MPa and up to 4523 N at the maximum operating pressure of 0.9 MPa. Its 25 mm diameter piston rod and 28 mm adjustable air cushion are engineered for reliable mid-range industrial automation tasks.
This model features a built-in magnet (suffix -S), allowing direct mounting of CMSG, DMSG, or EMSG sensors for contactless position feedback. The NBR (nitrile) seal material provides dependable sealing performance within the standard temperature range of -20 to +70 °C, making it a practical choice for general-purpose pneumatic systems.
Airtac SC80 Standard Cylinder SC80X1330SN Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X1330SN |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 1330 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X1330SN
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×1330 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X1330SN Is Used
Material Transfer
Operates long-stroke pushers or transfer arms on packaging lines, using the 1330 mm reach to move products between distant conveyor stations.
Clamping & Fixturing
Provides consistent clamping force for large workpieces in welding or assembly jigs, with sensor feedback confirming the jaw position via the built-in magnet.
Bin Diverter Gates
Actuates high-reach diverter gates in gravity-fed chutes or sorting systems, where the long stroke directs materials to different destinations.
Is the Airtac SC80 Standard Cylinder SC80X1330SN the Right Cylinder?
For applications requiring less force, consider stepping down to a 63 mm bore (1559 N at 0.5 MPa). If a higher force is needed, the 100 mm bore model provides 3927 N at the same pressure. With a stroke of 1330 mm, ensure the rod is not subjected to significant side loads; use an external linear guide or a guided cylinder variant to prevent rod bending and premature bearing wear. For a direct replacement, match the 80 mm bore, 1330 mm stroke, PT port thread, NBR seal, and the built-in magnet configuration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X1330SN FAQ
The theoretical push force at 0.5 MPa is 2513 N. At the standard operating pressure of 0.7 MPa, the force is 3518 N, and at the maximum operating pressure of 0.9 MPa, it reaches 4523 N.
To ensure a drop-in replacement, verify five key points: the 80 mm bore, the 1330 mm stroke, the PT port thread, the NBR seal material, and the presence of a built-in magnet for sensors. The SC is a tie-rod cylinder, so confirm the mounting footprint matches another AirTAC SC tie-rod unit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X1330SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.