Airtac SC80 Standard Cylinder SC80X1350S
The AirTAC Airtac SC80 Standard Cylinder SC80X1350S is a genuine double-acting standard air cylinder with a Ø80mm bore and 1350mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke1350 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X1350S
The SC80X1350S is an 80 mm bore, 1350 mm stroke double-acting pneumatic cylinder from the AirTAC SC tie-rod series. It produces a push force of 2513 N at 0.5 MPa and up to 4523 N at the maximum operating pressure of 0.9 MPa, making it suitable for demanding linear motion tasks.
This model features a 25 mm diameter piston rod and PT3/8 port threads. The suffix 'S' indicates a built-in magnet, allowing direct mounting of CMSG, DMSG, or EMSG sensors on the barrel for contactless position feedback. The adjustable pneumatic cushion (28 mm length) decelerates the piston at stroke end to reduce impact.
Airtac SC80 Standard Cylinder SC80X1350S Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X1350S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 1350 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X1350S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×1350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X1350S Is Used
Long-Stroke Material Pusher
The 1350 mm stroke and 2513 N push force at 0.5 MPa are well-suited for pushing heavy products across wide conveyor lines or diverting pallets in packaging systems.
Automated Welding Fixture
The built-in magnet enables end-of-stroke sensing to confirm clamp position in automated welding cells, while the 80 mm bore provides the clamping force needed for large fabrications.
Vertical Lift Assist
With 2268 N pull force at 0.5 MPa, this cylinder can assist in raising and lowering heavy tooling or platforms in assembly stations, with sensors confirming safe retraction.
Is the Airtac SC80 Standard Cylinder SC80X1350S the Right Cylinder?
For applications needing less force, the 63 mm bore SC63 series provides 1559 N at 0.5 MPa. If higher force is required, stepping up to the 100 mm bore SC100 series delivers 3927 N at the same pressure. Always match the bore, 1350 mm stroke, PT3/8 port thread, and the magnetic sensor option when replacing this cylinder.
With a 1350 mm stroke, the 25 mm rod is extended significantly. Avoid direct side loads on the rod end; use an external linear guide or a guided cylinder configuration to protect the rod bearing from bending moments and ensure long service life.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X1350S FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 4523 N.
Yes. The 'S' in the model code SC80X1350S designates a built-in magnet around the piston. This allows you to clamp CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the barrel's external tie-rod slots to detect piston position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X1350S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.