Airtac SC80 Standard Cylinder SC80X1360S
The AirTAC Airtac SC80 Standard Cylinder SC80X1360S is a genuine double-acting standard air cylinder with a Ø80mm bore and 1360mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke1360 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X1360S
The SC80X1360S is a double-acting pneumatic cylinder from the AirTAC SC tie-rod series, featuring an 80 mm bore and an extended 1360 mm stroke. At 0.5 MPa operating pressure, it generates a substantial push force of 2513 N, with a pull force of 2268 N, making it suitable for long-travel material transfer and actuation tasks.
This model includes a built-in magnet (-S suffix), allowing direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors along the barrel for precise position feedback. The 25 mm diameter piston rod and 28 mm adjustable air cushion at each end provide robust guidance and smooth deceleration, while the PT3/8 port thread ensures standard pneumatic connections.
Airtac SC80 Standard Cylinder SC80X1360S Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X1360S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 1360 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X1360S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×1360 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X1360S Is Used
Long-Stroke Material Pusher
The 1360 mm stroke and 2513 N force at 0.5 MPa are ideal for pushing heavy pallets or products across wide conveyor transfer stations, with magnetic sensors confirming full extension and retraction.
Automated Panel Tilter
Used to tilt large solar panels or sheet metal through a wide arc. The adjustable cushion decelerates the high inertia load smoothly, while the magnet provides end-of-stroke confirmation for the PLC.
Vertical Bin Gate Actuator
Controls a tall vertical slide gate on a bulk material hopper. The cylinder's pull force of 2268 N at 0.5 MPa reliably lifts the gate, and the built-in magnet enables easy integration of safety interlock sensors.
Is the Airtac SC80 Standard Cylinder SC80X1360S the Right Cylinder?
Select the SC80X1360S when your application demands a long 1360 mm stroke with 2513 N of push force at 0.5 MPa. For higher force requirements, consider stepping up to the SC100 bore, which provides 3927 N at the same pressure. If a shorter, more compact cylinder is sufficient, the SC63 bore delivers 1559 N.
For this stroke length, side-load management is critical. The 25 mm rod, while robust, can experience bending moments under lateral forces over a 1360 mm extension. Always use an external guide rail or rod-alignment coupler to prevent rod bearing wear and ensure linear motion. When replacing, match five key specifications: 80 mm bore, 1360 mm stroke, PT3/8 port thread, the built-in magnet (-S), and the basic mounting style.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X1360S FAQ
At the standard 0.5 MPa operating pressure, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 1.0 MPa, the theoretical push force reaches 5026 N.
Yes. The -S suffix in the model code SC80X1360S signifies a built-in magnetic piston. This allows you to clamp AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the cylinder's tie-rod barrel to detect piston position without additional brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X1360S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.