Airtac SC80 Standard Cylinder SC80X1375S
The AirTAC Airtac SC80 Standard Cylinder SC80X1375S is a genuine double-acting standard air cylinder with a Ø80mm bore and 1375mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke1375 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X1375S
The AirTAC SC80X1375S is a double-acting pneumatic cylinder delivering 2513 N of push force at 0.5 MPa and up to 4523 N at 0.9 MPa operating pressure. With an 80 mm bore and a 1375 mm stroke, this model features a 25 mm diameter piston rod and a 28 mm adjustable air cushion at each end to decelerate the piston smoothly.
This configuration includes a built-in magnet (-S suffix), allowing direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors on the barrel for non-contact position sensing. The body length A is 182 mm, and the cylinder uses a PT3/8 port with an M20x1.5 rod thread, suitable for filtered air from 0.15 to 1.0 MPa.
Airtac SC80 Standard Cylinder SC80X1375S Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X1375S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 1375 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X1375S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×1375 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X1375S Is Used
Long-Stroke Material Transfer
The 1375 mm stroke and 2513 N push force suit long-distance part pushers or diverters on packaging and assembly conveyors, where sensor feedback from the built-in magnet confirms end-of-stroke position.
Automated Panel Pressing
Apply up to 4523 N at 0.9 MPa for pressing, clamping, or forming operations on wood, plastic, or sheet metal panels, using the adjustable cushion to quieten the cycle at high speed.
Vertical Lift Assistance
Use in a guided vertical lift for heavy totes or bins, where the 2268 N pull force at 0.5 MPa retracts the load and the magnet-equipped barrel enables precise mid-stroke position verification.
Is the Airtac SC80 Standard Cylinder SC80X1375S the Right Cylinder?
Choose the SC80 bore when your application needs between 2513 N and 4523 N of thrust. If you require higher force, step up to the SC100 bore which provides 3927 N at 0.5 MPa; for a lighter, more compact solution, the SC63 bore offers 1559 N at the same pressure. For this 1375 mm stroke, ensure the load is guided externally to prevent side-load bending on the 25 mm rod.
To replace an existing cylinder, match these five points exactly: 80 mm bore, 1375 mm stroke, PT3/8 port thread, the built-in magnet (-S) for sensor compatibility, and the basic mounting style. This is a tie-rod cylinder, not an ISO 15552 profile, so dimensional interchangeability is limited to other AirTAC SC series units.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X1375S FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 4523 N. The theoretical maximum force at 1.0 MPa is 513 kgf.
Yes. The -S suffix indicates a built-in magnet around the piston, so you can directly clamp AirTAC CMSG, DMSG, or EMSG sensors onto the barrel to detect piston position without any additional brackets or modifications.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X1375S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.