Airtac SC80 Standard Cylinder SC80X14
The AirTAC Airtac SC80 Standard Cylinder SC80X14 is a genuine double-acting standard air cylinder with a Ø80mm bore and 14mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke14 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
About the Airtac SC80 Standard Cylinder SC80X14
The SC80X14 is a compact-stroke double-acting pneumatic cylinder from the AirTAC SC tie-rod series, pairing an 80 mm bore with a short 14 mm travel. At 0.5 MPa it generates 2513 N pushing force and 2268 N pulling force, rising to 4523 N push at the maximum operating pressure of 0.9 MPa, making it a high-force actuator for short-throw clamping, pressing, or ejection tasks.
This model uses a 25 mm diameter piston rod with M20x1.5 male threads and PT3/8 ports. The total extended body length is approximately 196 mm (body length A of 182 mm plus the 14 mm stroke). Adjustable air cushioning at both ends decelerates the piston across a 28 mm cushion zone, protecting end caps during high-cycle operation.
Airtac SC80 Standard Cylinder SC80X14 Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X14 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 14 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X14
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×14 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X14 Is Used
Short-Stroke Clamping
The 14 mm travel and 2513 N force at 0.5 MPa suit pneumatic clamping fixtures in woodworking or metal fabrication, where a rapid, high-force grip is needed without a long cylinder body.
Part Ejection & Stamping
Delivers a sharp 4523 N punch at 0.9 MPa for ejecting parts from injection molds or light stamping dies, with adjustable cushioning to manage end-of-stroke impact in fast cycles.
Diverter Gate Actuation
Powers a pneumatic diverter or sorting gate on a conveyor line. The compact 14 mm stroke provides just enough movement to redirect packages while the 80 mm bore supplies ample force against product weight.
Is the Airtac SC80 Standard Cylinder SC80X14 the Right Cylinder?
For applications needing more force at the same short stroke, stepping up to the 100 mm bore SC100 series provides 3927 N at 0.5 MPa. If space is tight and less force is acceptable, the 63 mm bore SC63 family delivers 1559 N at 0.5 MPa. The 14 mm stroke is a standard offering within the SC80 range (max standard stroke 1200 mm).
When replacing an existing cylinder, match five points: 80 mm bore, 14 mm stroke, PT3/8 port thread, basic (no accessory) mounting, and the absence of a magnetic piston. This is a tie-rod cylinder, not an ISO 15552 profile, so dimensional interchangeability is limited to another AirTAC SC80 tie-rod unit of the same configuration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X14 FAQ
At 0.7 MPa supply pressure the SC80X14 generates 3518 N of pushing force on extension and 3175 N on retraction (calculated from the 80 mm bore and 25 mm rod). The maximum operating pressure is 1.0 MPa, delivering a theoretical push of 5026 N.
This specific model (SC80X14 without the -S suffix) does not include a built-in magnet in the piston. To use CMSG, DMSG, or EMSG reed or solid-state sensors clamped directly to the barrel, order the SC80X14-S variant which adds the magnetic piston ring.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X14
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.