Airtac SC80 Standard Cylinder SC80X1430
The AirTAC SC80 Standard Cylinder SC80X1430 is a genuine double-acting standard air cylinder with a Ø80mm bore and 1430mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke1430 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X1430
The AirTAC SC80X1430 is a double-acting tie-rod cylinder delivering a push force of 2513 N at 0.5 MPa and up to 4523 N at the maximum operating pressure of 0.9 MPa. With an 80 mm bore and a 25 mm diameter piston rod, this model is built for medium-to-heavy linear actuation tasks where a long working reach is essential.
This 1430 mm stroke unit stays within the 1500 mm maximum standard stroke for the SC80 bore, ensuring it is a catalog-standard item. The cylinder body length A is 182 mm, making the total extended length approximately 1612 mm. It features an adjustable air cushion of 28 mm to decelerate the piston smoothly, reducing end-of-stroke impact.
Airtac SC80 Standard Cylinder SC80X1430 Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X1430 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 1430 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X1430
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×1430 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X1430 Is Used
Long-Reach Material Transfer
Pushes or pulls heavy bins and pallets across wide conveyor spans in automated warehouses, using its 1430 mm stroke to bridge large gaps.
Automated Sawmill Carriage
Drives the log carriage on a sawmill infeed, providing the long, steady thrust needed to advance timber through cutting blades.
Heavy-Duty Jig Actuation
Operates large welding or assembly jigs where a long, controlled linear stroke is needed to position heavy tooling precisely.
Is the Airtac SC80 Standard Cylinder SC80X1430 the Right Cylinder?
For applications requiring less force, consider stepping down to the SC63 bore, which provides 1559 N of push at 0.5 MPa. If you need more power, the SC100 bore offers 3927 N at the same pressure. At a 1430 mm stroke, ensure the rod is supported against side loads; an unsupported 25 mm rod at this extension can bend under off-axis forces. For guided support, use an external linear guide. When replacing, match the 80 mm bore, 1430 mm stroke, PT port thread, and basic mount configuration exactly.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X1430 FAQ
At 0.7 MPa (7 bar) operating pressure, the SC80X1430 generates a theoretical push force of 3518 N. The pull force on the retract stroke is 2268 N, accounting for the 25 mm rod diameter.
For strokes exceeding 300 mm, especially with the 25 mm rod, external guides or a guided cylinder configuration are strongly recommended. The long, unsupported rod is susceptible to bending and premature seal wear under side loads.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X1430
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.