Airtac SC80 Standard Cylinder SC80X1470STC
The AirTAC SC80 Standard Cylinder SC80X1470STC is a genuine double-acting standard air cylinder with a Ø80mm bore and 1470mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke1470 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X1470STC
The SC80X1470STC is a double-acting pneumatic cylinder delivering 2513 N of push force at 0.5 MPa and up to 4523 N at the maximum operating pressure of 0.9 MPa. With an 80 mm bore and a long 1470 mm stroke, it features a 25 mm diameter piston rod and a 28 mm adjustable air cushion at each end to decelerate the load smoothly.
This configuration includes a built-in magnet (S) for direct mounting of CMSG/DMSG/EMSG sensors and a centre trunnion pivot mount (TC) supplied with the TCM1 bracket (F-SC80TC). The body length A is 182 mm, making the total extended length approximately 1652 mm. It uses standard PT ports (PT3/8) and TPU seals for a temperature range of -20 to +70 C.
Airtac SC80 Standard Cylinder SC80X1470STC Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X1470STC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 1470 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X1470STC
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×1470 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X1470STC Is Used
Long-Reach Material Transfer
The 1470 mm stroke is ideal for pushing or pulling products across wide conveyor gaps or transferring materials between distant stations in packaging lines.
Automated Panel Tipping
With a centre trunnion mount for pivoting action and 4523 N of force, this cylinder can tip heavy panels or bins in automated assembly or waste disposal systems.
Large Gate or Diverter Actuation
Provides the long travel and high force needed to open and close large hopper gates or actuate flow diverters in agricultural and bulk material handling equipment.
Is the Airtac SC80 Standard Cylinder SC80X1470STC the Right Cylinder?
For applications requiring more force, stepping up to the 100 mm bore SC100 series provides 3927 N at 0.5 MPa. If a shorter, more compact solution is acceptable, the 63 mm bore SC63 series offers 1559 N at 0.5 MPa. When replacing this cylinder, ensure the new unit matches the 80 mm bore, 1470 mm stroke, PT3/8 port thread, centre trunnion (TC) mounting, and the built-in magnet for sensor compatibility.
With a stroke of 1470 mm, the 25 mm rod is subject to significant bending moments under side loads. It is critical to use an external linear guide or rod support to prevent rod bearing damage and ensure reliable operation.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X1470STC FAQ
At the standard 0.5 MPa operating pressure, the cylinder provides 2513 N of push force and 2268 N of pull force. At the maximum operating pressure of 0.9 MPa, the push force increases to 4523 N.
The 'S' in the model code means it has a built-in magnet, allowing you to clamp CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the barrel. The 'TC' suffix indicates a centre trunnion mount (F-SC80TC), which includes the TCM1 bracket and allows the cylinder to pivot during operation.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X1470STC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.