Airtac SC80 Standard Cylinder SC80X1600STC
The AirTAC SC80 Standard Cylinder SC80X1600STC is a genuine double-acting standard air cylinder with a Ø80mm bore and 1600mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke1600 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X1600STC
The SC80X1600STC is a double-acting pneumatic cylinder delivering 2513 N of push force at 0.5 MPa and up to 4523 N at 0.9 MPa operating pressure. Its 25 mm diameter piston rod and 28 mm adjustable air cushion are engineered for high-cycle industrial tasks, while the 1600 mm stroke—exceeding the standard 1500 mm maximum—is built as a made-to-order length for extended linear reach.
This model features a built-in magnet for direct mounting of CMSG/DMSG/EMSG sensors and a centre trunnion (TC) mount, supplied with the TCM1 bracket, enabling the cylinder to pivot smoothly under swinging loads. The body length A is 182 mm, resulting in a total extended length of approximately 1782 mm.
Airtac SC80 Standard Cylinder SC80X1600STC Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X1600STC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 1600 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X1600STC
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×1600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X1600STC Is Used
Long-Stroke Conveyor Diverting
Operates long-reach diverters or pushers on packaging lines, where the 1600 mm stroke transfers products across wide conveyor gaps with 2513 N of force.
Pivoting Welding Fixture Actuation
Positions welding or assembly fixtures that pivot, using the centre trunnion mount for smooth angular movement and magnetic sensors for end-of-stroke confirmation.
Extended-Reach Gate Actuation
Drives a vertical lift gate or hopper door requiring extended linear travel, with the adjustable cushion decelerating the 25 mm rod quietly at each cycle end.
Is the Airtac SC80 Standard Cylinder SC80X1600STC the Right Cylinder?
Choose the SC80 bore when your application needs between 2513 N and 4523 N of force; for higher thrust, step up to the SC100 which provides 3927 N at 0.5 MPa. For lighter, more compact needs, the SC63 offers 1559 N at the same pressure. At a 1600 mm stroke, the 25 mm rod is susceptible to bending under side loads—always use an external guide rail or rod-alignment coupler to protect the rod bearing and seals. For a direct replacement, match the 80 mm bore, 1600 mm stroke, PT port thread, centre trunnion mount (F-SC80TC), and the built-in magnet (-S) for sensor compatibility.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X1600STC FAQ
At 0.5 MPa, this cylinder provides 2513 N pushing and 2268 N pulling. At the maximum operating pressure of 0.9 MPa, the push force increases to 4523 N. The theoretical maximum at 1.0 MPa is 513 kgf.
Yes, but with care. The 1600 mm stroke is non-standard for an 80 mm bore (max standard is 1500 mm). For a direct replacement, you must match the 80 mm bore, exact 1600 mm stroke, PT port thread, centre trunnion mount (TC with TCM1 bracket), and the built-in magnet (-S). Always guide the rod externally to prevent bending at this length.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X1600STC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.