Airtac SC80 Standard Cylinder SC80X1750S
The AirTAC SC80 Standard Cylinder SC80X1750S is a genuine double-acting standard air cylinder with a Ø80mm bore and 1750mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke1750 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X1750S
The AirTAC SC80X1750S is a double-acting single-rod pneumatic cylinder with an 80 mm bore and an extended 1750 mm non-standard stroke, built for applications requiring a long linear reach. At 0.5 MPa it delivers 2513 N push force and 2268 N pull force, rising to 4523 N push at the 0.9 MPa maximum operating pressure; the 25 mm piston rod and 28 mm adjustable air cushion manage end-of-stroke deceleration.
This model includes the -S suffix for a built-in magnet mounted on the piston, allowing CMSG, DMSG, or EMSG reed and solid-state sensors to clamp directly onto the tie-rod barrel for non-contact position sensing. The body length A is 182 mm, giving a total extended length of approximately 1932 mm, and the port thread is PT1/8.
Airtac SC80 Standard Cylinder SC80X1750S Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X1750S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 1750 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X1750S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×1750 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X1750S Is Used
Long-Reach Part Transfer
The 1750 mm stroke moves components between widely spaced conveyor stations or assembly cells. The built-in magnet enables end-of-stroke confirmation via barrel-mounted sensors.
Vertical Panel Lift & Lower
With 2513 N push force, it raises and lowers access panels or tooling plates over a long vertical travel. Use external guides and flow controls to manage descent speed safely.
Automated Warehouse Pusher
Pushes tall or deep pallet loads across a wide roller bed. The adjustable cushion softens the impact at both ends of the 1750 mm stroke, protecting the cylinder and load.
Is the Airtac SC80 Standard Cylinder SC80X1750S the Right Cylinder?
Select the SC80 bore when your application needs push force in the 2513 N range at standard plant air pressure; for lighter loads the SC63 bore provides 1559 N push at 0.5 MPa, while the SC100 steps up to 3927 N. Because this cylinder has a non-standard 1750 mm stroke exceeding the 1500 mm maximum standard stroke for the 80 mm bore, it is a made-to-order item—confirm lead time when ordering.
For any stroke above 300 mm, and especially at this length, side loads and rod buckling are critical concerns. Always guide the load externally with a linear rail or rod guide, or consider a guided cylinder, to prevent bending stress on the 25 mm rod. When replacing an existing cylinder, match five points: 80 mm bore, 1750 mm stroke, PT1/8 port thread, the built-in magnet (-S), and the basic (no bracket) mounting configuration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X1750S FAQ
At 0.5 MPa (5 bar) the cylinder produces 2513 N pushing and 2268 N pulling. At the maximum operating pressure of 0.9 MPa, push force reaches 4523 N. The theoretical maximum at 1.0 MPa is 513 kgf (5028 N).
No, the maximum standard stroke for the SC80 bore is 1500 mm. The 1750 mm stroke is a non-standard, made-to-order length. You must also use external guides for a rod of this length to prevent buckling under side load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X1750S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.