Airtac SC80 Standard Cylinder SC80X175SCA
The AirTAC SC80 Standard Cylinder SC80X175SCA is a genuine double-acting standard air cylinder with a Ø80mm bore and 175mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke175 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X175SCA
The SC80X175SCA is a double-acting pneumatic cylinder delivering 2513 N push force at 0.5 MPa (4523 N at 0.9 MPa) from its 80 mm bore. With a 175 mm stroke and 28 mm adjustable air cushion, it provides controlled deceleration for mid-stroke positioning tasks.
This model includes a built-in magnet (-S) for direct mounting of CMSG/DMSG/EMSG sensors and a rear single clevis mount (CA, part F-SC80CA) for pivoting applications. The 25 mm rod with M20x1.5 thread and PT1/8 port suits standard pneumatic connections.
Airtac SC80 Standard Cylinder SC80X175SCA Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X175SCA |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X175SCA
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X175SCA Is Used
Hopper Gate Actuation
The rear clevis mount allows the cylinder to pivot as it opens and closes hopper discharge gates, with the 2513 N force handling bulk material loads.
Pivoting Diverter Arms
Magnetic piston sensing confirms arm position at each end of the 175 mm stroke, ensuring reliable product sorting on conveyor lines.
Clamp & Fixture Swing
The CA clevis enables a compact swinging motion for clamping fixtures, while the adjustable cushion protects tooling at stroke end.
Is the Airtac SC80 Standard Cylinder SC80X175SCA the Right Cylinder?
Choose the SC80X175SCA when you need 2513 N at 0.5 MPa and a pivoting rear mount. If your load exceeds 3518 N at 0.7 MPa, step up to the 100 mm bore (3927 N at 0.5 MPa). For lighter loads under 1559 N, the 63 mm bore saves space. The 175 mm stroke is well within the 1500 mm maximum for this bore, so no side-load concerns at this length.
For replacement, match five points: 80 mm bore, 175 mm stroke, PT1/8 port, rear clevis (CA) mounting, and the -S magnet for sensor compatibility. This is a tie-rod cylinder, not an ISO 15552 profile, so dimensional interchangeability is limited to other AirTAC SC80 models.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X175SCA FAQ
At 0.7 MPa operating pressure, the 80 mm bore produces 3518 N of push force and 3175 N of pull force (accounting for the 25 mm rod area). At the maximum 0.9 MPa, push force reaches 4523 N.
No. The AirTAC SC series is a tie-rod cylinder and is physically shorter than an ISO 15552 cylinder of the same bore and stroke. The mounting dimensions, body length (182 mm + 175 mm stroke), and port locations differ. Only replace with another AirTAC SC80 tie-rod cylinder matching the bore, stroke, PT port, CA clevis mount, and magnet option.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X175SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.