Airtac SC80 Standard Cylinder SC80X175SH
The AirTAC SC80 Standard Cylinder SC80X175SH is a genuine double-acting standard air cylinder with a Ø80mm bore and 175mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke175 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X175SH
The SC80X175SH is a double-acting pneumatic cylinder delivering 2513 N of push force at 0.5 MPa (4523 N at 0.9 MPa), built on an 80 mm bore with a 25 mm diameter piston rod. Its 175 mm stroke is well within the 1500 mm maximum standard stroke for this bore, making it a stock-configuration actuator for medium-reach linear tasks.
This variant includes a built-in magnet (-S) so CMSG, DMSG, or EMSG reed and solid-state sensors can be clamped directly onto the tie-rod barrel for non-contact position sensing. The -H suffix specifies Viton (FKM) seals, shifting the operating temperature range upward to 0 to +150 °C, which suits hot environments where standard TPU seals would degrade.
Airtac SC80 Standard Cylinder SC80X175SH Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X175SH |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X175SH
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X175SH Is Used
High-Temperature Process Actuation
Viton seals allow this cylinder to operate continuously in ambient temperatures up to 150 °C, making it suitable for autoclave doors, drying ovens, or foundry equipment where heat would destroy standard seals.
Sensor-Monitored Sorting Gates
The built-in magnet enables CMSG/DMSG sensors to confirm end-of-stroke position, providing reliable feedback for diverting packages or parts on a conveyor line with a 175 mm throw.
Hot-Mold Clamping
Delivers 4523 N of clamping force at 0.9 MPa to hold molds or fixtures closed during injection or forming processes where tool temperatures exceed 70 °C.
Is the Airtac SC80 Standard Cylinder SC80X175SH the Right Cylinder?
For applications needing slightly less force, the 63 mm bore SC63 series provides 1559 N at 0.5 MPa; for more force, the 100 mm bore SC100 series delivers 3927 N. This 80 mm bore cylinder uses PT1/4 ports and a 25 mm rod, so when replacing an existing unit, match bore, stroke, PT port thread, the built-in magnet (-S), and the Viton seal material to ensure sensor and thermal compatibility.
At a 175 mm stroke, the rod is well-supported within the bearing, but any side load should still be managed with an external guide or linear rail to prevent premature bushing wear and rod bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X175SH FAQ
At 0.5 MPa (approximately 72 psi), this 80 mm bore cylinder generates 2513 N pushing and 2268 N pulling. At the maximum operating pressure of 0.9 MPa, push force reaches 4523 N.
Yes. The -S suffix equips the piston with a magnet compatible with AirTAC CMSG (reed) and DMSG/EMSG (solid-state) sensors, which mount directly onto the cylinder's tie-rod barrel for non-contact position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X175SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.