Airtac SC80 Standard Cylinder SC80X175SLB
The AirTAC SC80 Standard Cylinder SC80X175SLB is a genuine double-acting standard air cylinder with a Ø80mm bore and 175mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke175 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X175SLB
The SC80X175SLB is a double-acting pneumatic cylinder delivering 2513 N push force at 0.5 MPa (4523 N at 0.9 MPa). Its 80 mm bore and 175 mm stroke suit medium-duty clamping, pressing, and material-handling tasks where a compact tie-rod design is preferred.
This model includes a built-in magnet (-S) for barrel-mounted CMSG/DMSG/EMSG sensors and LB axial foot mounts (F-SC80LB) for secure surface installation. The 25 mm piston rod, PT3/8 ports, and 28 mm adjustable air cushion provide smooth end-of-stroke deceleration. Body length A is 182 mm, giving a total extended length of approximately 357 mm.
Airtac SC80 Standard Cylinder SC80X175SLB Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X175SLB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X175SLB
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X175SLB Is Used
Conveyor Diverters
The 175 mm stroke and 2513 N push force reliably actuate gate arms and diverters on packaging and sortation conveyors, with LB feet simplifying mounting to the conveyor frame.
Assembly Presses
Delivers up to 4523 N at 0.9 MPa for press-fit and staking operations in automated assembly cells. The built-in magnet enables end-of-stroke confirmation via barrel-mounted sensors.
Clamping Fixtures
Used in CNC and welding fixtures where the 80 mm bore provides strong, consistent clamping force. Adjustable cushioning reduces impact and vibration at the end of each cycle.
Is the Airtac SC80 Standard Cylinder SC80X175SLB the Right Cylinder?
Choose the SC80 when your load needs roughly 2500 N at 0.5 MPa. If force requirements are lower, step down to the SC63 (1559 N at 0.5 MPa); for heavier loads, the SC100 delivers 3927 N at the same pressure. Always match five points when replacing an existing cylinder: bore, stroke, port thread (PT here), mounting accessory (LB foot), and magnet option (present).
At 175 mm stroke the rod is well supported, but if your application introduces side loads, consider an external guide rail or a guided cylinder to protect the rod bearing and seals from premature wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X175SLB FAQ
At 0.5 MPa supply pressure the cylinder produces 2513 N pushing and 2268 N pulling. At 0.7 MPa it reaches 3518 N push, and at the maximum operating pressure of 0.9 MPa it delivers 4523 N push. The theoretical maximum at 1.0 MPa is 513 kgf.
No. The AirTAC SC series is a tie-rod cylinder and is physically shorter than an ISO 15552 profile cylinder, so it is not dimensionally interchangeable. Only replace another AirTAC SC tie-rod cylinder with matching bore, stroke, PT port thread, LB foot mount, and magnet option.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X175SLB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.