Airtac SC80 Standard Cylinder SC80X175SN
The AirTAC SC80 Standard Cylinder SC80X175SN is a genuine double-acting standard air cylinder with a Ø80mm bore and 175mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke175 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X175SN
The SC80X175SN is a double-acting pneumatic cylinder delivering 2513 N push force at 0.5 MPa and 4523 N at 0.9 MPa. Its 80 mm bore and 175 mm stroke suit medium-force clamping, pressing, and material-handling tasks where a compact tie-rod design is preferred.
This model includes a built-in magnet (-S) for direct mounting of CMSG/DMSG/EMSG reed or solid-state sensors, enabling rod-position feedback without external brackets. NBR seals (-N) provide reliable sealing for general industrial air service, and the PT1/8 port (PT thread) keeps connections simple. The 28 mm adjustable air cushion at each end decelerates the 25 mm diameter rod smoothly.
Airtac SC80 Standard Cylinder SC80X175SN Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X175SN |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X175SN
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X175SN Is Used
Sensor-Monitored Clamping
The built-in magnet works with CMSG/DMSG sensors to confirm clamp position, preventing cycle-start errors in automated CNC fixtures and welding jigs.
Product Sorting Gates
Delivers a firm 2513 N push at 0.5 MPa to divert cartons or totes on a conveyor. Sensors signal gate-open and gate-closed states to the line controller.
Assembly Presses
Generates up to 4523 N at 0.9 MPa for pressing bearings, bushings, or dowels. The NBR seals handle lubricated and non-lubricated compressed air reliably.
Is the Airtac SC80 Standard Cylinder SC80X175SN the Right Cylinder?
Choose the SC80X175SN when 2513 N at 0.5 MPa fits the load. If you need more force, the SC100 series provides 3927 N at the same pressure; for a lighter, more compact solution, the SC63 delivers 1559 N. Always match replacement cylinders on five points: bore (80 mm), stroke (175 mm), PT port thread, the built-in magnet (-S), and the basic (no-bracket) mounting.
At 175 mm stroke, the 25 mm rod is well-supported for axial loads. For applications with significant side force, add an external linear guide or consider a guided cylinder to protect the rod bearing and seals from premature wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X175SN FAQ
At 0.5 MPa, push force is 2513 N and pull force is 2268 N. At 0.7 MPa, push is 3518 N. At the maximum operating pressure of 0.9 MPa, push reaches 4523 N. The theoretical maximum at 1.0 MPa is 513 kgf.
Yes. The -S suffix indicates a built-in magnet, so AirTAC CMSG (reed) and DMSG/EMSG (solid-state) sensors clip directly onto the barrel. Always confirm the sensor type matches your controller input (PNP/NPN).
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X175SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.