Airtac SC80 Standard Cylinder SC80X175TC
The AirTAC SC80 Standard Cylinder SC80X175TC is a genuine double-acting standard air cylinder with a Ø80mm bore and 175mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke175 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X175TC
The SC80X175TC is a double-acting pneumatic cylinder delivering 2513 N of push force at 0.5 MPa and up to 4523 N at the maximum operating pressure of 0.9 MPa. With an 80 mm bore and a 175 mm stroke, it features a 25 mm diameter piston rod and PT3/8 ports, making it a robust actuator for medium-to-heavy linear motion tasks.
This model comes factory-equipped with a TC centre trunnion mount, including the TCM1 bracket, which allows the cylinder to pivot during operation—ideal for swinging or articulating loads. The adjustable air cushion at each end (28 mm length) decelerates the piston smoothly, reducing end-of-stroke impact. The body length A is 182 mm, giving a total extended length of approximately 357 mm.
Airtac SC80 Standard Cylinder SC80X175TC Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X175TC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X175TC
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X175TC Is Used
Conveyor Diverter Gates
The pivoting TC mount and 2513 N push force at 0.5 MPa make this cylinder ideal for actuating diverter arms on packaging or sorting conveyors, smoothly redirecting products between lanes.
Welding Fixture Clamping
Delivers a powerful 4523 N clamping force at 0.9 MPa. The trunnion mount allows the cylinder body to swing into position on a welding jig, applying consistent pressure to hold workpieces.
Agricultural Implement Control
Used to pivot chutes or adjust the angle of tillage tools. The TPU seals handle dusty, damp conditions from -20 to +70 °C, and the robust tie-rod construction withstands field vibration.
Is the Airtac SC80 Standard Cylinder SC80X175TC the Right Cylinder?
Select the SC80 bore when your application needs between 2513 N and 4523 N of force. For a lighter load, stepping down to the SC63 bore provides 1559 N at 0.5 MPa. If you need more force, the SC100 bore offers 3927 N at the same pressure. This cylinder uses a centre trunnion mount (F-SC80TC) for pivoting motion; ensure the mounting pins are aligned to avoid binding.
For this 175 mm stroke, side loading is a moderate concern. Always guide the load externally with rails or rods to prevent bending moment on the piston rod and premature seal wear. For a direct replacement, match the 80 mm bore, 175 mm stroke, PT3/8 port thread, TC centre trunnion mounting, and the absence of a magnet sensor option.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X175TC FAQ
At the standard 0.5 MPa operating pressure, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 4523 N. The theoretical maximum force at 1.0 MPa is 513 kgf.
Yes. The 'TC' suffix indicates it is supplied with a centre trunnion mount (part code F-SC80TC) and the TCM1 bracket. This allows the cylinder body to pivot, which is essential for applications where the load moves through an arc. The mounting pins must be fixed in rigid, aligned bearings.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X175TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.