Airtac SC80 Standard Cylinder SC80X1880S
The AirTAC SC80 Standard Cylinder SC80X1880S is a genuine double-acting standard air cylinder with a Ø80mm bore and 1880mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke1880 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X1880S
The AirTAC SC80X1880S is a double-acting single-rod pneumatic cylinder with an 80 mm bore and an extended 1880 mm non-standard stroke, delivering a push force of 4523 N at 0.9 MPa. This model includes a built-in magnet (-S suffix), allowing CMSG, DMSG, or EMSG reed and solid-state sensors to be mounted directly on the tie-rod barrel for reliable end-of-stroke detection.
With a 25 mm piston rod and PT3/8 ports, the cylinder body length (A) measures 182 mm, resulting in a total extended length of approximately 2062 mm. The adjustable pneumatic cushion at each end (28 mm length) decelerates the piston to reduce impact, while the operating temperature range for the standard TPU seals is -20 to +70 °C.
Airtac SC80 Standard Cylinder SC80X1880S Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X1880S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 1880 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X1880S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×1880 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X1880S Is Used
Long-Reach Material Transfer
The 1880 mm stroke moves heavy pallets or sheets across wide conveyor gaps in distribution centers, with magnetic sensors confirming full extension and retraction.
Automated Panel Indexing
Positions large wood or composite panels through multi-step CNC work cells. The 4523 N push force at 0.9 MPa drives heavy tooling sleds with smooth, cushioned stops.
Industrial Gate Actuation
Operates tall sliding gates or ventilation dampers in processing plants. The tie-rod design and 25 mm rod provide robust structural support for extended linear movements.
Is the Airtac SC80 Standard Cylinder SC80X1880S the Right Cylinder?
For a step down in force, the SC63 bore provides 2805 N push at 0.9 MPa. For higher thrust, the SC100 bore offers 7068 N. This 1880 mm stroke exceeds the standard maximum of 1500 mm for the 80 mm bore, making it a non-standard, made-to-order length. Given the long unsupported stroke, external guides or a self-guided cylinder are strongly recommended to prevent rod bending and bearing damage from side loads.
When replacing this cylinder, match five points: 80 mm bore, 1880 mm stroke, PT port thread, the built-in magnet for sensor compatibility, and the basic mounting configuration. This is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X1880S FAQ
At 0.5 MPa, the cylinder delivers 2513 N pushing and 2268 N pulling. At the maximum operating pressure of 0.9 MPa, the push force increases to 4523 N. The theoretical maximum at 1.0 MPa is 513 kgf.
For strokes exceeding 300 mm, side loads can cause rod deflection and premature seal wear. Use an external linear guide rail system to absorb transverse forces, or consider a guided cylinder variant. The built-in magnet allows position sensors to monitor stroke, but does not provide mechanical support.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X1880S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.