Airtac SC80 Standard Cylinder SC80X192S
The AirTAC SC80 Standard Cylinder SC80X192S is a genuine double-acting standard air cylinder with a Ø80mm bore and 192mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke192 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X192S
The AirTAC SC80X192S is an 80 mm bore double-acting tie-rod cylinder delivering 2513 N push force at 0.5 MPa (4523 N at the 0.9 MPa max operating pressure). Its 192 mm stroke sits well within the standard range for this bore, making it a stock-friendly choice for medium-travel linear tasks.
The built-in magnet (-S suffix) lets you clamp CMSG, DMSG, or EMSG reed and solid-state sensors directly onto the barrel for contactless end-of-stroke or mid-position sensing. With a 25 mm piston rod, PT3/8 ports, and a 28 mm adjustable air cushion, this genuine AirTAC actuator provides smooth deceleration and reliable cycling in automated equipment.
Airtac SC80 Standard Cylinder SC80X192S Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X192S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 192 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X192S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×192 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X192S Is Used
Conveyor Diverter Gate
The 2513 N push force easily shifts a diverter flap on a 500 mm wide belt, while the magnetic piston lets sensors confirm gate position before the next product arrives.
Clamp & Fixture Actuation
Delivers 4523 N at 0.9 MPa for heavy part clamping on a CNC fixture. The adjustable cushion protects the fixture from impact shock, and the magnet enables clamp/unclamp verification.
Pallet Stop & Lift
Raises a stop blade or lift table segment in a pallet conveyor. The 192 mm stroke provides ample lift, and the -S magnet triggers a sensor to interlock with the adjacent roller drive.
Is the Airtac SC80 Standard Cylinder SC80X192S the Right Cylinder?
Choose the SC80 when your load needs roughly 2500 N at typical plant pressure. If the force is marginal, stepping up to the SC100 bore raises push to 3927 N at 0.5 MPa; if you are over-specified, the SC63 bore provides 1559 N. For this 192 mm stroke, side-load risk is moderate—ensure the load is guided or the rod is aligned axially to protect the rod bearing.
To replace an existing cylinder, match five points: 80 mm bore, 192 mm stroke, PT3/8 port thread, the built-in magnet (-S), and the basic (no bracket) mounting. The SC is a tie-rod design and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X192S FAQ
At 0.7 MPa the push force is 3518 N, and the pull force is 3175 N (rod side). The maximum operating push force at 0.9 MPa is 4523 N. These values assume dynamic conditions; static theoretical force at 1.0 MPa is 513 kgf.
Yes. The -S suffix means a magnet is built into the piston, so AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors clip directly onto the barrel's sensor groove. Without the -S option, the barrel has no magnet and sensors cannot detect position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X192S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.