Airtac SC80 Standard Cylinder SC80X193S
The AirTAC SC80 Standard Cylinder SC80X193S is a genuine double-acting standard air cylinder with a Ø80mm bore and 193mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke193 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X193S
The AirTAC SC80X193S is an 80 mm bore, 193 mm stroke double-acting tie-rod cylinder with a built-in magnet for barrel-mounted sensors. It generates a push force of 2513 N at 0.5 MPa and 4523 N at the maximum operating pressure of 0.9 MPa, making it a robust mid-range actuator for industrial linear motion.
This model features a 25 mm diameter piston rod with an M20x1.5 male thread and PT3/8 pneumatic ports. The 28 mm adjustable air cushion at each end decelerates the piston smoothly, reducing end-of-stroke impact. The integrated magnet allows direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors for reliable, non-contact position feedback.
Airtac SC80 Standard Cylinder SC80X193S Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X193S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 193 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X193S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×193 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X193S Is Used
Material Handling Gates
Operates diverter gates and stops on conveyor lines, where the 2513 N push force at 0.5 MPa reliably directs packages or pallets. The built-in magnet provides sensor feedback to confirm gate position.
Clamping & Fixturing
Applies consistent clamping pressure in machining and welding fixtures. The 25 mm rod resists bending under direct axial loads, and magnetic sensors verify clamp engagement before a cycle starts.
Lifting & Tipping Stations
Powers tipping mechanisms for bins and hoppers in warehouse automation. The 4523 N maximum thrust at 0.9 MPa handles heavy off-centre loads when paired with a trunnion mount.
Is the Airtac SC80 Standard Cylinder SC80X193S the Right Cylinder?
Select the SC80 when your application needs roughly 2500 N of force at standard plant air pressure. If you require less force, the SC63 delivers 1559 N at 0.5 MPa; for higher force, step up to the SC100 which provides 3927 N. The 193 mm stroke is within the standard range for this bore.
For a direct replacement, match five points: 80 mm bore, 193 mm stroke, PT3/8 port thread, the built-in magnet (-S suffix), and the basic mounting style. This cylinder is not dimensionally interchangeable with ISO 15552 profiles; it is a tie-rod design that is shorter in overall length.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X193S FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 4523 N. The theoretical maximum force at 1.0 MPa is 513 kgf.
Yes. The -S suffix indicates a built-in magnet in the piston, so you can clamp AirTAC CMSG, DMSG, or EMSG sensors directly onto the barrel for end-of-stroke or intermediate position sensing without external brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X193S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.