Airtac SC80 Standard Cylinder SC80X193SN
The AirTAC SC80 Standard Cylinder SC80X193SN is a genuine double-acting standard air cylinder with a Ø80mm bore and 193mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke193 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X193SN
The AirTAC SC80X193SN is a double-acting pneumatic cylinder delivering 2513 N of push force and 2268 N of pull force at 0.5 MPa, built on an 80 mm bore with a 25 mm diameter piston rod. Its 193 mm stroke sits well within the standard range for this bore size, and the adjustable air cushion (28 mm length) provides smooth deceleration at end-of-travel.
This model includes a built-in magnet (-S suffix) for direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors directly on the tie-rod barrel, enabling precise position feedback. The NBR seal option (-N suffix) provides reliable sealing for general industrial environments, while the standard PT (Rc) port threads maintain compatibility with common pneumatic fittings.
Airtac SC80 Standard Cylinder SC80X193SN Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X193SN |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 193 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X193SN
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×193 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X193SN Is Used
Material Handling & Diverting
The 2513 N push force at 0.5 MPa easily actuates diverters, stops, and lift-and-transfer stations on packaging and assembly lines, with the magnet confirming gate position.
Clamping & Pressing
Delivers up to 4523 N of clamping force at 0.9 MPa for holding parts during machining or welding. The built-in magnet enables sensor confirmation of clamp engagement.
Industrial Automation
A robust tie-rod actuator for general automation tasks like pushing, ejecting, or lifting. The NBR seals and 25 mm rod provide durability in high-cycle, non-aggressive environments.
Is the Airtac SC80 Standard Cylinder SC80X193SN the Right Cylinder?
The SC80 bore generates 2513 N at 0.5 MPa, a significant step up from the 1559 N of the SC63. If your load requires more force, the SC100 offers 3927 N at the same pressure. For applications with side loads or a 193 mm stroke, consider the rod bearing moment; if the load is not perfectly guided, an external linear guide or a guided cylinder variant is recommended to prevent rod bending and premature seal wear.
When replacing an existing cylinder, match five key points: 80 mm bore, 193 mm stroke, PT port threads, the built-in magnet for sensor compatibility, and the NBR seal material. This tie-rod design is shorter than an ISO 15552 profile cylinder, so verify the overall body length of 182 mm plus the 193 mm stroke fits your machine envelope.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X193SN FAQ
At the standard operating pressure of 0.5 MPa, this cylinder provides a theoretical push force of 2513 N and a pull force of 2268 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 4523 N. The theoretical maximum force at 1.0 MPa is 513 kgf.
Yes. The -S suffix in the model code indicates a built-in magnet on the piston. This allows you to mount AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the cylinder's tie-rod barrel to detect piston position without any additional brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X193SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.