Airtac SC80 Standard Cylinder SC80X195
The AirTAC SC80 Standard Cylinder SC80X195 is a genuine double-acting standard air cylinder with a Ø80mm bore and 195mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke195 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X195
The SC80X195 is a double-acting tie-rod cylinder with an 80 mm bore and 195 mm stroke, delivering a push force of 2513 N at 0.5 MPa and up to 4523 N at the maximum operating pressure of 0.9 MPa. Its 25 mm diameter piston rod and PT3/8 port provide a robust fluid path for filtered air, while the 28 mm adjustable air cushion at each end decelerates the piston smoothly to reduce end-of-stroke impact.
This model’s 195 mm stroke sits comfortably within the 1500 mm maximum standard stroke for the 80 mm bore family. The body length A is 182 mm, giving a total extended length of approximately 377 mm. As a genuine AirTAC SC cylinder, it offers a compact tie-rod design that is shorter than an equivalent ISO 15552 cylinder, making it a practical choice where installation space is limited.
Airtac SC80 Standard Cylinder SC80X195 Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X195 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X195
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X195 Is Used
Material Handling Gates
The 2513 N push force at 0.5 MPa easily actuates diverter gates and stops on medium-duty conveyor lines, handling packages and small pallets with reliable speed.
Clamping & Pressing Fixtures
Delivers up to 4523 N at 0.9 MPa for holding workpieces during machining or assembly. The adjustable cushion protects the fixture from hammering at the end of each cycle.
Tensioning & Forming Operations
The 195 mm stroke provides the travel needed for web tensioning rollers or light metal-forming dies, where consistent double-acting force is required in both directions.
Is the Airtac SC80 Standard Cylinder SC80X195 the Right Cylinder?
For applications requiring slightly less force, stepping down to a 63 mm bore provides 1559 N of push at 0.5 MPa, while moving up to a 100 mm bore increases push force to 3927 N at the same pressure. When replacing an existing cylinder, match five points exactly: 80 mm bore, 195 mm stroke, PT3/8 port thread, basic (no bracket) mounting, and the absence of a magnet. The SC is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
At this stroke length, the 25 mm rod is well-supported within the standard stroke range, but any side load must be managed externally. If the load is not guided, consider adding an external linear guide or switching to a guided cylinder to protect the rod bearing from bending moments.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X195 FAQ
At 0.5 MPa the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, push force reaches 4523 N. The theoretical maximum force at 1.0 MPa is 513 kgf.
No. The SC series is a tie-rod cylinder with a shorter overall body length than an ISO 15552 cylinder. It is not dimensionally interchangeable. Only replace with another AirTAC SC 80 mm bore cylinder or a tie-rod cylinder with identical mounting dimensions, port size, and stroke.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X195
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.