Airtac SC80 Standard Cylinder SC80X195S
The AirTAC SC80 Standard Cylinder SC80X195S is a genuine double-acting standard air cylinder with a Ø80mm bore and 195mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke195 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X195S
The SC80X195S is an 80 mm bore, 195 mm stroke double-acting pneumatic cylinder from the AirTAC SC tie-rod series. It generates a push force of 2513 N at 0.5 MPa and up to 4523 N at the maximum operating pressure of 0.9 MPa, driven by a 25 mm diameter piston rod with M20x1.5 male threads.
This model includes a built-in magnet (-S suffix), allowing CMSG, DMSG, or EMSG reed and solid-state sensors to clamp directly onto the barrel for non-contact position sensing. The cylinder body length is 182 mm, resulting in a total extended length of approximately 377 mm. Standard PT1/4 ports and TPU seals provide reliable operation from -20 to +70 °C.
Airtac SC80 Standard Cylinder SC80X195S Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X195S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X195S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X195S Is Used
Conveyor Diverter Gates
The 2513 N push force at 0.5 MPa reliably actuates diverter gates on medium-duty package handling lines, with the built-in magnet confirming gate position via barrel-mounted sensors.
Automated Clamping Fixtures
Delivers consistent clamping force for CNC machining and welding fixtures. The 195 mm stroke accommodates varying part sizes, while the 25 mm rod resists deflection under axial loads.
Pallet Stop Mechanisms
Ideal for end-of-line pallet stops in logistics systems. The adjustable air cushion decelerates the 25 mm rod smoothly at stroke end, reducing impact noise and mechanical shock.
Is the Airtac SC80 Standard Cylinder SC80X195S the Right Cylinder?
Choose the SC80 when your application needs between 2513 N and 4523 N of pneumatic force. If you require higher force, step up to the SC100 bore, which provides 3927 N at 0.5 MPa. For lower force requirements, the SC63 bore delivers 1559 N at the same pressure.
For this 195 mm stroke, ensure the load is guided and free from significant side forces. If side loading is present, consider an external guide rail or a guided cylinder to prevent rod bending and premature bearing wear. When replacing an existing cylinder, match five key points: bore (80 mm), stroke (195 mm), PT1/4 port thread, the built-in magnet for sensors, and the basic mounting configuration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X195S FAQ
At the standard operating pressure of 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 4523 N. The theoretical maximum force at 1.0 MPa is 513 kgf.
Yes. The -S suffix in the model code SC80X195S indicates a built-in magnet is fitted inside the piston. This allows AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors to be clamped onto the tie-rod barrel for end-of-stroke or intermediate position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X195S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.