Airtac SC80 Standard Cylinder SC80X2000
The AirTAC SC80 Standard Cylinder SC80X2000 is a genuine double-acting standard air cylinder with a Ø80mm bore and 2000mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke2000 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X2000
The AirTAC SC80X2000 is a double-acting pneumatic cylinder with an 80 mm bore and an extended 2000 mm stroke, built for applications requiring a long linear reach. At 0.5 MPa, it provides a push force of 2513 N and a pull force of 2268 N, scaling to 4523 N at the maximum operating pressure of 0.9 MPa.
This model features a 25 mm diameter piston rod with an M20x1.5 thread and a 28 mm adjustable air cushion at each end to decelerate the load. Because the 2000 mm stroke exceeds the standard maximum of 1500 mm for this bore, it is a non-standard, made-to-order configuration. The body length A is 182 mm, making the total extended length approximately 2182 mm.
Airtac SC80 Standard Cylinder SC80X2000 Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X2000 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 2000 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X2000
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×2000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X2000 Is Used
Long-Reach Material Transfer
Pushes or pulls heavy bins, pallets, or components across a 2-meter span on a transfer station, using its full 4523 N capacity at 0.9 MPa.
Automated Gluing or Welding
Extends a dispensing head or welding torch along a long linear axis, where the 2000 mm stroke covers the full length of a large workpiece in one motion.
Grain Silo Gate Actuation
Operates a large slide gate at the base of a silo or hopper, providing the long travel and high force needed to shear through a column of bulk material.
Is the Airtac SC80 Standard Cylinder SC80X2000 the Right Cylinder?
Select the SC80 bore when your application requires a force between 2513 N and 4523 N. If your load is lighter, stepping down to a 63 mm bore saves space and air consumption, while stepping up to a 100 mm bore provides 3927 N of force at 0.5 MPa. For this 2000 mm stroke, the long, unsupported 25 mm rod is highly susceptible to bending under side loads; you must use an external linear guide or rod support to prevent buckling and seal damage.
To ensure a direct replacement, match five key points: the 80 mm bore, the 2000 mm stroke, the PT3/8 port thread, the basic (no bracket) mounting configuration, and the absence of a magnet. This cylinder is a tie-rod design and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X2000 FAQ
At the standard 0.5 MPa operating pressure, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 4523 N.
A 2000 mm stroke with a 25 mm rod creates a high risk of buckling and side-load damage. You must mount the load on an external linear guide rail system to absorb all transverse forces, ensuring the cylinder rod is only subjected to pure axial push/pull loads.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X2000
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.