Airtac SC80 Standard Cylinder SC80X2000S
The AirTAC Airtac SC80 Standard Cylinder SC80X2000S is a genuine double-acting standard air cylinder with a Ø80mm bore and 2000mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke2000 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X2000S
The AirTAC SC80X2000S is a double-acting pneumatic cylinder delivering 2513 N of push force at 0.5 MPa, scaling up to 4523 N at the 0.9 MPa maximum operating pressure. With a 2000 mm stroke, this model is a made-to-order non-standard length, exceeding the standard 1500 mm maximum for the 80 mm bore. The 25 mm diameter piston rod and 28 mm adjustable air cushion work together to manage end-of-stroke deceleration in this extended configuration.
This genuine AirTAC tie-rod cylinder includes a built-in magnet, designated by the -S suffix, allowing direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors on the barrel for precise position feedback. The standard PT port thread and TPU seals provide reliable operation within a -20 to +70 °C temperature range, making it a robust choice for long linear motion tasks.
Airtac SC80 Standard Cylinder SC80X2000S Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X2000S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 2000 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X2000S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×2000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X2000S Is Used
Long-Reach Material Pusher
The 2000 mm stroke, with 4523 N of force at 0.9 MPa, is ideal for pushing heavy pallets or product rows off a wide conveyor or accumulation table in a distribution center.
Automated Welding Positioner
Provides the long linear travel needed to move a welding torch or fixture into position over a large workpiece, with the built-in magnet confirming end-of-travel via sensors.
Grain Silo Gate Actuator
Operates a large sliding gate at the base of a silo or hopper, where the long stroke is needed to fully open the chute, and the high force overcomes material weight.
Is the Airtac SC80 Standard Cylinder SC80X2000S the Right Cylinder?
Selecting the SC80X2000S requires careful consideration of the 2000 mm non-standard stroke. For such a long unsupported rod, external guides or a self-guided cylinder are strongly recommended to prevent rod bending and bearing damage from side loads. If the 2513 N push force at 0.5 MPa is insufficient, stepping up to the 100 mm bore provides 3927 N; if it is more than needed, the 63 mm bore offers 1559 N. For a direct replacement, match the 80 mm bore, 2000 mm stroke, PT port thread, and the -S magnet option exactly.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X2000S FAQ
The theoretical push force is 2513 N at 0.5 MPa, 3518 N at 0.7 MPa, and 4523 N at the 0.9 MPa maximum operating pressure. The pull force on the rod's retract stroke is slightly lower due to the piston rod area, at 2268 N at 0.5 MPa.
No, the maximum standard stroke for an 80 mm bore SC cylinder is 1500 mm. The 2000 mm stroke on this SC80X2000S is a non-standard, made-to-order length. For such a long stroke, using an external guide rail or rod support is critical to protect the cylinder from side-load bending moments.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X2000S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.