Airtac SC80 Standard Cylinder SC80X200CA
The AirTAC SC80 Standard Cylinder SC80X200CA is a genuine double-acting standard air cylinder with a Ø80mm bore and 200mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke200 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X200CA
The SC80X200CA is an 80 mm bore, 200 mm stroke double-acting pneumatic cylinder from the AirTAC SC tie-rod series. It generates a substantial 2513 N of push force at 0.5 MPa (4523 N at the 0.9 MPa maximum operating pressure), driven by a 25 mm diameter piston rod with M20x1.5 male threads. The adjustable air cushion at each end (28 mm length) decelerates the piston smoothly, protecting end caps during high-cycle operation.
This model is configured with a rear single clevis (CA) mounting, part F-SC80CA, which allows the cylinder body to pivot during actuation—ideal for applications where the load follows an arc. The standard PT1/4 port threads and TPU seals suit general industrial environments with filtered air at -20 to +70 °C. Its body length A is 182 mm, giving a total extended length of approximately 382 mm.
Airtac SC80 Standard Cylinder SC80X200CA Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X200CA |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X200CA
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X200CA Is Used
Clamping & Fixturing
The 2513 N force at 0.5 MPa provides ample clamping power for CNC fixtures, welding jigs, and assembly stations where the rear clevis mount allows the cylinder to swing clear for part loading.
Part Diverter Gates
With its pivoting CA clevis mount, this cylinder reliably actuates diverter gates on conveyor lines, sorting packages or components by swinging a gate through a defined arc.
Agricultural Machinery
The robust tie-rod construction and 28 mm cushion handle the dusty, high-cycle demands of agricultural equipment like chute controls, bin gates, and linkage actuation on harvesters.
Is the Airtac SC80 Standard Cylinder SC80X200CA the Right Cylinder?
Choose the SC80 bore when your application needs between roughly 2500 N and 4500 N of force on a standard 0.15-1.0 MPa shop air supply. If you can accept a smaller envelope, stepping down to the SC63 bore delivers 1559 N push at 0.5 MPa; for heavier loads, the SC100 bore provides 3927 N at the same pressure. At 200 mm stroke, rod bending is not a primary concern under pure axial loads, but any side load requires an external guide or a guided cylinder to protect the rod bearing and seal.
To replace an existing SC80X200CA, match all five points: 80 mm bore, 200 mm stroke, PT1/4 port thread, rear single clevis (CA) mounting accessory, and the absence of a magnet. The SC is a tie-rod cylinder and is shorter than an ISO 15552 profile; it will only drop into a footprint designed for another AirTAC SC or an equivalent tie-rod cylinder with the same mounting geometry.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X200CA FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, push force reaches 4523 N. The theoretical maximum at 1.0 MPa is 513 kgf.
Yes. The CA rear single clevis is a removable accessory (F-SC80CA). You can swap it for other AirTAC SC80 mounts like an LB foot (F-SC80LB), FA front flange (F-SC80FA), or TC centre trunnion (F-SC80TC) if your mounting requirements change.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X200CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.