Airtac SC80 Standard Cylinder SC80X200CB
The AirTAC SC80 Standard Cylinder SC80X200CB is a genuine double-acting standard air cylinder with a Ø80mm bore and 200mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke200 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X200CB
The AirTAC SC80X200CB is a double-acting single-rod pneumatic cylinder delivering 2513 N of push force at 0.5 MPa (4523 N at 0.9 MPa). Its 200 mm stroke is well within the 1500 mm maximum standard stroke for the 80 mm bore, making it a readily available workhorse for medium-duty linear actuation.
This model features a rear double clevis (CB) mount, providing a pivoting anchor point at the cap end for applications where the cylinder body needs to swing through an arc. The 25 mm diameter piston rod and 28 mm adjustable air cushion at each end ensure smooth deceleration, while the PT3/8 ports offer reliable connection in standard pneumatic circuits.
Airtac SC80 Standard Cylinder SC80X200CB Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X200CB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X200CB
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X200CB Is Used
Agricultural Equipment Actuation
The rear clevis mount allows the cylinder to pivot freely, making it ideal for controlling chutes, gates, or lift arms on harvesters and spreaders where the mounting angle changes during operation.
Conveyor Diverter Gates
With 2513 N of push force, this cylinder reliably actuates heavy diverter gates on aggregate or recycling conveyors. The pivoting CB mount accommodates the gate's arc of motion without binding.
Clamping & Welding Fixtures
The double clevis mount provides a secure, self-aligning pivot for clamping arms in welding jigs. The 28 mm air cushion protects the fixture from impact shock, ensuring consistent clamp force and long seal life.
Is the Airtac SC80 Standard Cylinder SC80X200CB the Right Cylinder?
Select the SC80 when your application needs roughly 2500 N of force at typical plant pressure; if you require less force, the SC63 delivers 1559 N at 0.5 MPa, and for more, the SC100 provides 3927 N. Always match the bore, 200 mm stroke, PT port thread, and CB mounting when replacing an existing unit.
For this 200 mm stroke, the rigid tie-rod construction and 25 mm rod handle axial loads well. If side loads are present, even at this moderate stroke, ensure the load is guided externally to prevent rod bending and premature seal wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X200CB FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 4523 N. The theoretical maximum at 1.0 MPa is 513 kgf.
This is a direct replacement for any AirTAC SC80X200CB or a compatible tie-rod cylinder matching an 80 mm bore, 200 mm stroke, rear double clevis mount (CB), and PT3/8 ports. It is not dimensionally interchangeable with ISO 15552 profile cylinders.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X200CB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.