Airtac SC80 Standard Cylinder SC80X200FA
The AirTAC SC80 Standard Cylinder SC80X200FA is a genuine double-acting standard air cylinder with a Ø80mm bore and 200mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke200 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X200FA
The AirTAC SC80X200FA is an 80 mm bore, 200 mm stroke double-acting pneumatic cylinder delivering 2513 N of push force at 0.5 MPa (4523 N at the 0.9 MPa maximum operating pressure). Its 25 mm diameter piston rod and 28 mm adjustable air cushion make it a robust choice for medium-to-heavy linear actuation tasks where a compact tie-rod body is preferred.
This model comes factory-assembled with an FA front rectangular flange (mounting accessory F-SC80FA), allowing the cylinder to be rigidly bolted to a machine panel or bulkhead from the rod-end face. The standard PT1/8 port threads and TPU seals suit filtered-air systems operating from -20 to +70 °C.
Airtac SC80 Standard Cylinder SC80X200FA Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X200FA |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X200FA
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X200FA Is Used
Package Diverting Gate
The 2513 N push force at 0.5 MPa easily drives a diverter flap on a conveyor line, sorting cartons by weight or destination with the FA flange bolted directly to the conveyor side frame.
Clamping & Fixturing
Delivers 4523 N of clamping pressure at 0.9 MPa for holding workpieces during CNC machining or welding. The front flange mount ensures the cylinder body stays rigidly fixed under high reaction forces.
Press-Fit Assembly
With 2.5 kN of force on standard shop air, this cylinder is well-suited for pressing bearings, bushings, or dowel pins into housings in a semi-automated assembly station.
Is the Airtac SC80 Standard Cylinder SC80X200FA the Right Cylinder?
For applications needing less force, stepping down to the 63 mm bore SC63 series reduces push force to 1559 N at 0.5 MPa, while stepping up to the 100 mm bore SC100 series increases it to 3927 N. The SC80X200FA's front flange mount is ideal when the cylinder body must be suspended from a vertical panel or precisely aligned with the driven load.
To ensure a correct replacement, match five points: 80 mm bore, 200 mm stroke, PT port thread, FA front flange mounting, and the absence of a magnet. The 200 mm stroke is well within the standard range; however, if side loads are present even at this stroke, consider an external guide rail to protect the rod bearing from bending stress.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X200FA FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, push force reaches 4523 N. The theoretical maximum force at 1.0 MPa is 513 kgf.
No. The AirTAC SC series is a tie-rod cylinder and its body length is shorter than an ISO 15552 cylinder, so mounting dimensions are not interchangeable. It is a direct replacement only for another AirTAC SC80 tie-rod cylinder with matching stroke, port thread, and FA front flange mount.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X200FA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.