Airtac SC80 Standard Cylinder SC80X200N
The AirTAC SC80 Standard Cylinder SC80X200N is a genuine double-acting standard air cylinder with a Ø80mm bore and 200mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke200 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X200N
The AirTAC SC80X200N is a double-acting pneumatic cylinder with an 80 mm bore and 200 mm stroke, fitted with NBR (nitrile) seals for standard temperature operation. It generates a push force of 2513 N at 0.5 MPa and can reach 4523 N at the maximum operating pressure of 0.9 MPa, driven by a 25 mm diameter piston rod.
This tie-rod cylinder uses PT3/8 ports and provides an adjustable air cushion of 28 mm at each end to decelerate the piston smoothly. The body length A is 182 mm, giving a total extended length of approximately 382 mm. It is a genuine AirTAC SC series unit built for reliable industrial automation.
Airtac SC80 Standard Cylinder SC80X200N Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X200N |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X200N
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X200N Is Used
Package Sorting Gates
The 2513 N push force at 0.5 MPa easily actuates diverter gates on medium-duty package handling conveyors, providing the rapid response needed for high-throughput sorting lines.
Clamping & Assembly Fixtures
Delivers a controlled 4523 N clamping force at 0.9 MPa for securing wood, plastic, or light metal components during drilling, gluing, or automated assembly processes.
Agricultural Equipment Actuation
The NBR seals and robust 25 mm rod are well-suited for actuating chutes, hopper doors, or press arms on farming machinery, operating reliably in dusty outdoor conditions.
Is the Airtac SC80 Standard Cylinder SC80X200N the Right Cylinder?
Choose the SC80 bore when your application needs between 2513 N and 4523 N of pneumatic force. If you require less force, the SC63 bore delivers 1559 N at 0.5 MPa, offering a more compact and energy-efficient alternative. For higher force demands, step up to the SC100 bore, which provides 3927 N at the same pressure.
For this 200 mm stroke, side loads are generally manageable, but always centre the load on the rod axis. When replacing an existing cylinder, match these five points exactly: 80 mm bore, 200 mm stroke, PT3/8 port thread, NBR seal material, and the basic (no bracket) mounting configuration. The SC series is a tie-rod design and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X200N FAQ
At the standard operating pressure of 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 4523 N. The theoretical maximum force at 1.0 MPa is 513 kgf.
No, you cannot. The AirTAC SC series is a tie-rod cylinder with a shorter body length (182 mm for the 80 bore) than a standard ISO 15552 profile cylinder. It is not dimensionally interchangeable. You must replace it with another AirTAC SC80 tie-rod cylinder or a unit with identical mounting dimensions.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X200N
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.