Airtac SC80 Standard Cylinder SC80X200SCB
The AirTAC SC80 Standard Cylinder SC80X200SCB is a genuine double-acting standard air cylinder with a Ø80mm bore and 200mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke200 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X200SCB
The SC80X200SCB is an 80 mm bore, 200 mm stroke double-acting pneumatic cylinder delivering a push force of 2513 N at 0.5 MPa and up to 4523 N at 0.9 MPa. This model includes a built-in magnet for direct mounting of CMSG/DMSG/EMSG sensors and a rear double clevis (CB) for pivoting applications, with a 25 mm diameter rod and PT3/8 ports.
Its tie-rod construction makes it shorter than an equivalent ISO 15552 cylinder, saving space in machine designs. The 28 mm adjustable air cushion at each end decelerates the piston smoothly, reducing end-of-stroke impact. The extended body length is 182 mm plus the 200 mm stroke, giving a total extended dimension of 382 mm.
Airtac SC80 Standard Cylinder SC80X200SCB Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X200SCB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X200SCB
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X200SCB Is Used
Agricultural Equipment Actuation
Operates chute diverters and hopper gates on harvesters and processing lines. The rear double clevis mount allows the cylinder to pivot freely, while the 2513 N push force at 0.5 MPa handles heavy grain or material flows.
Welding Fixture Clamping
Provides consistent clamping force for robotic welding cells. The built-in magnet enables end-of-stroke sensing via CMSG/DMSG sensors to confirm clamp engagement before the weld cycle starts, improving cycle safety.
Pivoting Conveyor Diverters
Drives a pivoting diverter arm on a packaging conveyor. The CB clevis mount supports the swinging motion, and the 28 mm adjustable cushion absorbs the kinetic energy of the diverter at the end of each stroke, reducing wear.
Is the Airtac SC80 Standard Cylinder SC80X200SCB the Right Cylinder?
Choose the SC80 bore when your application needs between 2513 N (push at 0.5 MPa) and 4523 N (push at 0.9 MPa). For lower force, step down to the SC63 bore which provides 1559 N at 0.5 MPa; for higher force, the SC100 bore offers 3927 N at 0.5 MPa. At 200 mm stroke, rod bending is not a primary concern, but always avoid direct side loading on the rod.
To replace an existing cylinder, match five points: 80 mm bore, 200 mm stroke, PT3/8 port thread, rear double clevis mounting (F-SC80CB), and the built-in magnet (-S) for sensor compatibility. The SC is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X200SCB FAQ
At 0.7 MPa operating pressure, the theoretical push force is 3518 N and the pull force on the retract stroke is 2268 N. These values assume a static condition; for dynamic applications, factor in a load ratio of 50-70%.
No. The AirTAC SC series is a tie-rod cylinder with a shorter overall body length (A=182 mm) than an ISO 15552 cylinder of the same bore. Direct dimensional interchangeability is not guaranteed. Replace it with another AirTAC SC80 tie-rod cylinder matching the 200 mm stroke, PT3/8 port, rear double clevis mount (F-SC80CB), and built-in magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X200SCB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.