Airtac SC80 Standard Cylinder SC80X200SFB
The AirTAC SC80 Standard Cylinder SC80X200SFB is a genuine double-acting standard air cylinder with a Ø80mm bore and 200mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke200 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X200SFB
The AirTAC SC80X200SFB is a double-acting pneumatic cylinder delivering a push force of 2513 N at 0.5 MPa (4523 N at 0.9 MPa). With an 80 mm bore and 200 mm stroke, it features a 25 mm diameter piston rod and PT3/8 ports, making it a robust workhorse for medium-to-heavy linear actuation tasks.
This model includes a built-in magnet (-S) for direct mounting of CMSG/DMSG/EMSG sensors, enabling precise end-of-stroke detection without external brackets. The rear rectangular flange (FB, part F-SC80FB) provides a rigid, perpendicular mounting surface on the cap end. The adjustable air cushion (28 mm length) decelerates the piston smoothly, reducing impact noise and vibration.
Airtac SC80 Standard Cylinder SC80X200SFB Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X200SFB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X200SFB
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X200SFB Is Used
Material Handling Gates
The 2513 N push force at 0.5 MPa is ideal for actuating diverter gates and stops on conveyor lines, with the rear flange allowing secure mounting to a vertical bulkhead.
Clamping & Fixturing
Provides strong, repeatable clamping for welding jigs and assembly fixtures. The built-in magnet allows sensors to confirm the clamp is fully engaged, improving cycle safety.
Small Press & Forming
Delivers up to 4523 N of force at 0.9 MPa for light pressing, stamping, or forming operations, with the adjustable cushion protecting tooling from impact damage.
Is the Airtac SC80 Standard Cylinder SC80X200SFB the Right Cylinder?
Choose the SC80 for applications needing up to 2513 N of push force at standard plant pressure. If your load requires significantly less force, stepping down to the SC63 (1559 N at 0.5 MPa) can reduce air consumption and physical size. For higher force demands, the SC100 bore delivers 3927 N at the same pressure.
To ensure a direct replacement, match these five points: 80 mm bore, 200 mm stroke, PT port thread, the FB rear flange mounting accessory, and the -S magnet option for sensor compatibility. This is a tie-rod cylinder, not an ISO 15552 profile, so dimensional interchangeability is limited to another AirTAC SC80 of the same configuration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X200SFB FAQ
At the standard 0.5 MPa operating pressure, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 4523 N.
No. The AirTAC SC series is a tie-rod cylinder that is physically shorter than an ISO 15552 cylinder. A direct dimensional replacement requires another AirTAC SC80 tie-rod cylinder with the same stroke, port thread, and FB rear flange mounting.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X200SFB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.