Airtac SC80 Standard Cylinder SC80X200SH
The AirTAC SC80 Standard Cylinder SC80X200SH is a genuine double-acting standard air cylinder with a Ø80mm bore and 200mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke200 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X200SH
The SC80X200SH is a double-acting pneumatic cylinder delivering 2513 N of push force at 0.5 MPa and 4523 N at the maximum operating pressure of 0.9 MPa. Its 200 mm stroke is paired with a 25 mm diameter piston rod and a 28 mm adjustable air cushion, making it a robust actuator for medium-to-heavy linear tasks.
This model is configured with a built-in magnet (-S) for direct mounting of CMSG/DMSG/EMSG sensors and high-temperature Viton seals (-H), extending the operating range from 0 to +150°C. The PT1/4 port and M20x1.5 rod thread ensure straightforward pneumatic connections.
Airtac SC80 Standard Cylinder SC80X200SH Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X200SH |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X200SH
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X200SH Is Used
High-Temperature Process Actuation
Viton seals enable reliable operation in autoclaves, dryers, and heated presses up to 150°C, where standard seals would degrade.
Material Handling & Sorting
The 4523 N push force at 0.9 MPa powerfully diverts or stops heavy packages on conveyor lines, with magnetic sensors confirming each cycle.
Clamping & Pressing Fixtures
Provides consistent, high-force clamping for welding or assembly jigs. The adjustable cushion decelerates the 25 mm rod smoothly, protecting the tooling.
Is the Airtac SC80 Standard Cylinder SC80X200SH the Right Cylinder?
Select the SC80 when your application requires a force step above the SC63, which provides 1559 N at 0.5 MPa. For even higher force, the SC100 delivers 3927 N at the same pressure. The 200 mm stroke is well within the 1500 mm maximum standard stroke for this bore.
For a guided replacement, match five points: 80 mm bore, 200 mm stroke, PT port thread, the basic mounting style, and the magnet/sensor option (-S). The SC series is a tie-rod design and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X200SH FAQ
At 0.5 MPa, it generates 2513 N pushing and 2268 N pulling. At the maximum operating pressure of 0.9 MPa, the pushing force increases to 4523 N. The theoretical maximum force at 1.0 MPa is 513 kgf.
No. The SC80X200SH is a double-acting cylinder and will not hold position if pressure is exhausted or the valve is centered. The adjustable air cushion only decelerates the piston at the end of stroke; it does not lock the rod. For load holding, you must add an external rod brake or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X200SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.