Airtac SC80 Standard Cylinder SC80X200STC
The AirTAC SC80 Standard Cylinder SC80X200STC is a genuine double-acting standard air cylinder with a Ø80mm bore and 200mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke200 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X200STC
The SC80X200STC is a double-acting pneumatic cylinder delivering 2513 N of push force at 0.5 MPa, rising to 4523 N at the 0.9 MPa maximum operating pressure. With an 80 mm bore, 25 mm piston rod, and a 200 mm stroke, this model includes a built-in magnet and centre trunnion mounting for pivoting applications.
This genuine AirTAC SC series cylinder has a tie-rod construction and a compact 182 mm body length, making it shorter than a comparable ISO 15552 profile. The adjustable air cushion at each end is 28 mm long, providing smooth deceleration. The -S suffix equips the barrel with a magnet for direct mounting of CMSG/DMSG/EMSG sensors.
Airtac SC80 Standard Cylinder SC80X200STC Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X200STC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X200STC
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X200STC Is Used
Conveyor Diverter Gates
The centre trunnion mount allows the cylinder body to pivot as it actuates a diverter gate on a conveyor line, with sensor confirmation of gate position via the built-in magnet.
Clamping & Welding Fixtures
Delivers 4523 N of clamping force at 0.9 MPa for holding workpieces in welding or assembly fixtures, where the pivoting trunnion mount simplifies integration into articulated tooling.
Bin Tippers & Dumpers
Powers the tilting mechanism on small bin tippers. The cylinder pivots on its trunnion bracket while pushing the bin to a dump angle, with magnetic sensors verifying end-of-stroke.
Is the Airtac SC80 Standard Cylinder SC80X200STC the Right Cylinder?
Choose the SC80 bore when your application needs between 2513 N and 4523 N of force. For lower force requirements, stepping down to the SC63 bore provides 1559 N at 0.5 MPa. For higher forces, the SC100 bore offers 3927 N at the same pressure. This 200 mm stroke model uses a centre trunnion (TC) mount, ideal for loads that need to pivot during the stroke.
To ensure a correct replacement, match five key points: 80 mm bore, 200 mm stroke, PT port thread, centre trunnion mounting (F-SC80TC bracket included), and the built-in magnet for sensor compatibility. For strokes of 300 mm or more, always evaluate side-load forces on the 25 mm rod and consider an external guide system.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X200STC FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 4523 N. The theoretical maximum force at 1.0 MPa is 513 kgf.
No, the AirTAC SC series is a tie-rod cylinder with a shorter body length than an ISO 15552 profile cylinder. It is not dimensionally interchangeable. It is a direct replacement only for another AirTAC SC80 tie-rod cylinder with matching stroke, PT ports, centre trunnion mount, and magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X200STC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.