Airtac SC80 Standard Cylinder SC80X200STCH
The AirTAC SC80 Standard Cylinder SC80X200STCH is a genuine double-acting standard air cylinder with a Ø80mm bore and 200mm stroke, PT3/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ80 mm
- Stroke200 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SC80 Standard Cylinder SC80X200STCH
The AirTAC SC80X200STCH is a double-acting tie-rod cylinder delivering 2513 N of push force at 0.5 MPa. Its 200 mm stroke is paired with a 25 mm diameter piston rod and a 28 mm adjustable air cushion for smooth end-of-stroke deceleration.
This model is configured with a built-in magnet for barrel-mounted sensors, a centre trunnion (TC) mount for pivoting applications, and high-temperature Viton seals. The total extended body length is approximately 382 mm (body length A of 182 mm plus the 200 mm stroke).
Airtac SC80 Standard Cylinder SC80X200STCH Technical Specifications
| Model | Airtac SC80 Standard Cylinder SC80X200STCH |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (approx.) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC80 Standard Cylinder SC80X200STCH
| SC | Standard tie-rod cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC80 Standard Cylinder SC80X200STCH Is Used
Conveyor Diverters
The 2513 N push force at 0.5 MPa easily actuates heavy-duty diverter gates on packaging and sortation conveyors, while the TC trunnion mount allows the cylinder to pivot freely.
Hot-Environment Clamping
With Viton seals rated for 0 to +150 °C, this cylinder is ideal for clamping fixtures near ovens, autoclaves, or heated presses where standard seals would degrade.
Pivoting Machine Guards
The centre trunnion mounting and magnetic piston enable precise, sensor-verified actuation of large safety guards that swing open and closed on automated machinery.
Is the Airtac SC80 Standard Cylinder SC80X200STCH the Right Cylinder?
Choose the SC80 bore when your application needs between 2513 N and 4523 N of force at standard plant air pressures. If your load requires more force, step up to the SC100 bore which provides 3927 N at 0.5 MPa. For a lighter, more compact solution, the SC63 delivers 1559 N.
When replacing a cylinder, match five key points: 80 mm bore, 200 mm stroke, PT port thread, the TC centre trunnion mount (with TCM1 bracket), and the -S magnet for sensor compatibility. For this 200 mm stroke, ensure the rod is guarded against side loads, as tie-rod cylinders are designed for axial push-pull forces. An external guide or a guided cylinder is recommended if side loading is present.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC80 Standard Cylinder SC80X200STCH FAQ
At 0.7 MPa operating pressure, the theoretical push force is 3518 N. The maximum force at 0.9 MPa is 4523 N. Always design with a margin below the theoretical maximum.
No. The AirTAC SC series is a tie-rod cylinder that is shorter than an ISO 15552 profile cylinder. It is a direct dimensional match only for another AirTAC SC80 tie-rod cylinder with the same bore, stroke, PT ports, TC mount, and magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC80 Standard Cylinder SC80X200STCH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.